[amayausers] Re: Caps - low profile parts

I think Tony is talking about the needle plate and the original post was
about the wings on the cap driver itself.  They come with 2 sizes of wings.
I just remove the wings altogether as hats seem to sew better for me that
way, although I don't use the WACF, I use hooptech cap frames.  They are
easier to hoop and I get better results that way.

Aaron Sargent
The Linen Barn
linen@xxxxxxxxxxx
Medford, Oregon
----- Original Message -----
From: "Chilmark UK" <tony@xxxxxxxxxxxxxxxxxxxxxxxxxx>
To: <amayausers@xxxxxxxxxxxxxxxx>
Sent: Friday, March 19, 2004 9:47 AM
Subject: Re: [amayausers] Caps - low profile parts


> Your Amaya should have come with a right angled flat blade screwdriver
which
> is used to loosen the finger screws and the needle plate, make sure you
> tighten the cap framewith  the screwdiver once you have installed it
> otherwise the viabration causes the screws to work loose and end up
messing
> up the Garmets or hats your working on ( I speak from experience and an
> expensive one)
>
> Regards
>
> Tony
> ChilmarkUK
> ----- Original Message -----
> From: "Captain Gold" <captaingold@xxxxxxxxxxxxx>
> To: <amayausers@xxxxxxxxxxxxxxxx>
> Sent: Tuesday, March 16, 2004 3:59 PM
> Subject: [amayausers] Caps - low profile parts
>
>
> > Help! Can someone tell me how I'm supposed to loosen the four screws
that
> > hold on the cap supports on the driver? I'd like to put the supports for
> > the low profile caps on, but I can't unscrew the four thumb screws. They
> > came from the factory so tight that I can't budge them. I don't want to
> use
> > a wrench for fear of damage.
> >
> > Thanks,
> > Connie Bechtel
> >
> >
> > Wyvern Productions
> > Custom embroidery for the custom mind.
> > http://www.wyvernproductions.com
> >
> >
> > ---------------------------------------------------------------------
> > To unsubscribe, e-mail: amayausers-unsubscribe@xxxxxxxxxxxxxxxx
> > For additional commands, e-mail: amayausers-help@xxxxxxxxxxxxxxxx
> >
>
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: amayausers-unsubscribe@xxxxxxxxxxxxxxxx
> For additional commands, e-mail: amayausers-help@xxxxxxxxxxxxxxxx
>
>



---------------------------------------------------------------------
To unsubscribe, e-mail: amayausers-unsubscribe@xxxxxxxxxxxxxxxx
For additional commands, e-mail: amayausers-help@xxxxxxxxxxxxxxxx

Other related posts: