[amayausers.com] Re: Cap hoop

  • From: theboards@xxxxxxxxxxxxxx
  • To: amayausers@xxxxxxxxxxxxx
  • Date: Thu, 16 Jun 2011 16:24:47 UT

This message was posted by monogramsbylaura on AmayaUsers.com. PLEASE DO NOT 
REPLY VIA EMAIL. Instead, respond to the thread on the WEBSITE by clicking 

On a structured hat measure the height starting at the bill and end where the 
hat starts to make a definite curve.  Take this measurment and subtract 1.14" 
and you get your design area. i.e. 3.25-1.14 = 2.11"  This would be the max 
height of your design.  It sounds like your design is a little to tall.
I did the same thing you are doing until I took the class and found out my 


The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list


Other related posts: