[amayausers] Re: Cap Needle Breaks

Janel,
The design is x=3.5 cm by y=5.49 cm

Cheryl Rotter
Team Sports Ink
5111 Grumann Dr. Ste #1B
Carson City, NV 89706
775-884-3550


-----Original Message-----
From: amayausers-bounce@xxxxxxxxxxxxx
[mailto:amayausers-bounce@xxxxxxxxxxxxx] On Behalf Of Janel Harris
Sent: Monday, February 28, 2005 10:28 AM
To: amayausers@xxxxxxxxxxxxx
Subject: [amayausers] Re: Cap Needle Breaks

Cheryl,

How tall is the design? 

Janel Harris
Dimensional Designs
http://www.dimdesigns.com
Design Shop Digitizing
Melco on-site Training
 

-----Original Message-----
From: amayausers-bounce@xxxxxxxxxxxxx
[mailto:amayausers-bounce@xxxxxxxxxxxxx] On Behalf Of Cheryl Rotter
Sent: Monday, February 28, 2005 10:16 AM
To: amayausers@xxxxxxxxxxxxx
Subject: [amayausers] Cap Needle Breaks

Hi everyone,
I am new to embroidery and am having some issues with needle breaks on
caps. My design was digitized by an experienced digitizer, although she
digitized it for Tajima (this is due to the fact she is our old contract
digitizer) and sent me the file. I am having needle breaks near the
bottom of the design (closest to the bill) I broke 20 needles on 20
hats. I am using the WACF because that is what I received with the
operators kit.  Not every hat broke a needle, some broke two and some
sewed without breaks. I switched to titanium needles in the hopes of
solving my problem.  Same issue exists..Any ideas for me? Would a
conventional cap frame help?
 
Cheryl Rotter
Team Sports Ink
5111 Grumann Dr. Ste #1B
Carson City, NV 89706
775-884-3550

Other related posts: