[amayausers] Re: Bobbin breaks problem

Following up on Aarons line of questioning... Is it the same needle(s) that
are breaking?  Could there be a cut in the roller(s).  Have you tried
switching to a less used needle and sewing out a practice on some backing
just to see if still does it?

-----Original Message-----
From: amayausers-bounce@xxxxxxxxxxxxx
[mailto:amayausers-bounce@xxxxxxxxxxxxx] On Behalf Of Linen Barn
Sent: Saturday, February 25, 2006 3:33 PM
To: amayausers@xxxxxxxxxxxxx
Subject: [amayausers] Re: Bobbin breaks problem

Darlene,

Which rollers are you using?

Aaron Sargent
The Linen Barn
linen@xxxxxxxxxxx
541-770-2957
Medford, OR
----- Original Message -----
From: "Extreme Embroidery" <extreme_embroidery@xxxxxxxxx>
To: "Amaya" <amayausers@xxxxxxxxxxxxx>
Sent: Saturday, February 25, 2006 12:09 PM
Subject: [amayausers] Bobbin breaks problem


> What would be causing my Amaya to show "Bobbin thread breaks" while sewing

> flats??  It has been happening alot today and makes no difference what I 
> am sewing.  It has done it on almost every design today.  Some have been 
> digitized and sewn all before several times without this problem.
>
>  I have changed bobbon cases, bobbins, adjusted bobbon tensions.  I can't 
> think of anything else I can do.  Does anyone have any suggestions???
>
>  Any ideas are very helpful!!
>  Thanks!
>
> Extreme Embroidery & Design
> Darlene Weber, Owner
> 640 6th Ave.  SE
> Britt,  Ia.  50423
> Ph (641) 843-3689
> Fax (641) 843-3689
>
> ---------------------------------
> Yahoo! Mail
> Use Photomail to share photos without annoying attachments.
>

Other related posts: