[amayausers] Re: Bobbin Issues
- From: "Tom Ladow" <tcladow@xxxxxxxxxxxxxxxxxxxxxxxxxx>
- To: <amayausers@xxxxxxxxxxxxx>
- Date: Thu, 12 Oct 2006 13:56:58 -0400
Judy;
I almost always run on acti-feed Auto. I did tighten the bobbin tension but
still get that nasty bobbin thread peeping through. I am doing golf shirts,
50/50.
Should I go to standard acti-feed?
tom
-----Original Message-----
From: amayausers-bounce@xxxxxxxxxxxxx
[mailto:amayausers-bounce@xxxxxxxxxxxxx] On Behalf Of OnleeJudy@xxxxxxx
Sent: Thursday, October 12, 2006 12:18 PM
To: amayausers@xxxxxxxxxxxxx
Subject: [amayausers] Re: Bobbin Issues
Hi Tom. It's a two step thing:
Increase bobbin tension; and
Increase material feed.
I know two increases. How can that be?
Another way to say it would be
Increase bobbin tension and
Decrease material feed tension, but that's just plain silly.
THANKS!
Judy
===========================================================
The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list
===========================================================
===========================================================
The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list
===========================================================
Other related posts:
