[amayausers] Re: Beanie

The warning will come up no matter what you do or who you bought the  
frame from.  It is to make sure you have reset everything!

I take a 3 oz. cutaway or tearaway, whatever it is...underneath,  
mount the beanie, THEN put the solvy on top and tuck it in or use  
some tape to hold the ends until it starts to sew.
On the right is the 'bent handle', lift that all the way up. The jaws  
really don't open much-make sure you move the needle bar under the  
needles so you don't acupuncture your knuckles. Just lift the front  
jaw up and slide the cap and underpiece in place, drop the top jaw,  
and position your solvy. I hate to waste solvy so I do that last and  
only as much as I need. Don't forget-it works better if you have a  
back fill underneath your lettering area to hold the fabric.  Not  
matter what you do-that area is not going to stretch again when they  
wear it.
Have fun!
Roland

On Jun 30, 2006, at 3:39 PM, Jo Leftwich wrote:

> Someone please tell me how to do a beanie on the round
> yellow clamping frame. Do you put tearaway under and
> solvy over and slide it in? I can't get it in the
> frame and can't find my directions for the frame . The
> warning keeps coming up on DS about how I can damage
> the Amaya.
>
> Jo
> Just Sew It Custom Embroidery
> Delta, Colorado
> <www.justsewitllc.com>
> 970-874-7899
> ===========================================================
>
> The AmayaUsers Mailing List
> Website: http://www.amayausers.com
> Discussion Board: http://www.amayausers.com/boards
> Subscribe/Unsubscribe: http://www.amayausers.com/list
>
> ===========================================================
>

=========================================================== 

The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list

===========================================================

Other related posts: