[amayausers] Re: Back to the Bobbin question
- From: "Kushnerick" <bkushner@xxxxxxxxxxxx>
- To: <amayausers@xxxxxxxxxxxxx>
- Date: Mon, 29 Jan 2007 17:19:14 -0700
The simple answer is yes, an "L" bobbin from any manufacturer will fit any
machine designed for an "L" bobbin.
Now having said that, the quality of a prewound bobbin can vary depending on
the manufacturer and sometimes individual machines do get a little
temperamental about whether the "L" bobbin used is plastic sided, paper
sided or no sides.
Bob
.
----- Original Message -----
From: "Image Embroidery" <imageembroidery@xxxxxxxxxx>
To: <amayausers@xxxxxxxxxxxxx>
Sent: Monday, January 29, 2007 2:00 PM
Subject: [amayausers] Back to the Bobbin question
> Can the Amayas use anyone "L" style bobbins?
> There are so many out there.
>
> LuAnn @ Image Embroidery
> Because Your "Image" Matters
> ===========================================================
>
> The AmayaUsers Mailing List
> Website: http://www.amayausers.com
> Discussion Board: http://www.amayausers.com/boards
> Subscribe/Unsubscribe: http://www.amayausers.com/list
>
> ===========================================================
===========================================================
The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list
===========================================================
- References:
- [amayausers] Back to the Bobbin question
- From: Image Embroidery
Other related posts:
- » [amayausers] Back to the Bobbin question
- » [amayausers] Re: Back to the Bobbin question
- » [amayausers] Re: Back to the Bobbin question
- [amayausers] Back to the Bobbin question
- From: Image Embroidery