Dana, Much better said! thanks! John ----- Original Message ----- From: "Dana Sandergaard" <danars@xxxxxxxxxxxxxxx> To: <amayausers@xxxxxxxxxxxxxxxx> Sent: Wednesday, April 02, 2003 4:49 PM Subject: Re: [amayausers] Re: Applique > Tom, > > the applique design should have a segmented color stop/change for the > applique. The design should sew all the non applique stitching and the > walk around outline stitching and then kick out the panto and stop to > apply the applique, spray adhesive the applique, place correcvtly inside > the outline stitch, then press start and the frams should go in an sew > the tackdown stitches. When you set the design up to sew, figure out > the proper color stop for the applique, instead of assigning it a color > in the sequence window, click on applique and this will tell the machine > to frame in and out on command. Than should be all > > Dana @ Threadworks --------------------------------------------------------------------- To unsubscribe, e-mail: amayausers-unsubscribe@xxxxxxxxxxxxxxxx For additional commands, e-mail: amayausers-help@xxxxxxxxxxxxxxxx