[amayausers] Re: Another question
- From: "wl solomonson" <wlsolomonson@xxxxxxxxxxx>
- To: amayausers@xxxxxxxxxxxxx
- Date: Wed, 12 Jan 2005 17:26:26 -0600
Thanks Jeff!
Wendy
Itchin' To Stitch
MN
>From: "Jeff Banks" <banksje@xxxxxxxxxxx>
>Reply-To: amayausers@xxxxxxxxxxxxx
>To: <amayausers@xxxxxxxxxxxxx>
>Subject: [amayausers] Re: Another question
>Date: Wed, 12 Jan 2005 15:57:44 -0700
>
>Wendy,
>
> There will be Tie Stitches with it set to Always. That is exactly what
>Always is for, so when hand trimming there will be Ties Stitches.
>
> These Ties Stitches can be seen in the software when Zoomed in on the
>screen or looking at the Stitches TAB on the right. To make them visible,
>Right Click at the very top of the Design Tree in the Project TAB on the
>right. Then go to Properties, and then to View. Click on "Show Tie Ins and
>Tie Offs". I like it set this way always, so if this is the way you want it
>to be always, click on Save As Default as well then click on Apply and then
>OK.
>
> Jeff Banks
> Melco Embroidery Systems
>
>----- Original Message -----
>From: "Itchin To Stitch" <itchin@xxxxxxxxxxxxxxx>
>To: "Amaya User Group" <amayausers@xxxxxxxxxxxxx>
>Sent: Wednesday, January 12, 2005 3:18 PM
>Subject: [amayausers] Another question
>
>
> > Herb Acree was kind enought to teach me a little trick with the Design
> > Shop lettering and I hope what I've done is okay and won't cause my
> > letters to unravel. I'm using Micro Block Large CP for some lettering
>and
> > was having to do a lot of trims because of the spacing my customer
>wants.
> > My trimmer has not been cooperating with me lately so I tried moving the
> > entry and exit point of the letters to give them a longer tail for hand
> > trimming. When I sewed it out it worked like a charm but my concern is
> > unraveling stitches. Back in Feb of '04 another user posted that this
>font
> > does not have a lock stitch and will unravel if the jump stitch is hand
> > trimmed. Is this true? If so what can I do to prevent this from
>happening
> > when I hand trim? I set my lock/trim tab to tie-in & off always on this
> > lettering. Will this do or is there something else to do? When I trimmed
> > my sample I tugged a little on the tails after I trimmed one side and
>they
> > seem secure. Any suggestions are most welcome!
> > Thanks,
> > Wendy Solomonson
> > Itchin' To Stitch
> > Arlington, MN
> > (507)964-2224
> >
>
>
Other related posts:
