[amayausers] Re: Amaya not centering properly

I am running 4.02.041 of the Design Shop, and Amaya OS 4.02.041, RSA 1.83, 
CSA 1.45


At 02:16 PM 2/25/2004 -0700, you wrote:

>   Paul,
>   This is process of elimination, so one down more to go.
>
>   The first thing we all need to know is what version of Design Shop and
>what version of Amaya OS are you currently running ?
>
>   I just checked our machine and it appears to  be off  also,  it is a new
>machine to us and we have not gotten to use it very much. I had not noticed
>this until today ,when I was trying to center an arrowhead design down the
>center seam of a cap. Kind of a pain.......
>
>   I just spoke to John Hansen at Melco in regards to this problem and that
>is the first thing I was asked-----what versions of OS and Design Shop am I
>running.
>
>   I have the 5.07 version of OS (just installed it) but at present I am
>still running the 4.02 version of Design Shop. John suggested that I do an
>uninstall of the 5.07 and re-install the old 4.02 version of OS , just to
>check whether or not the problem was present prior to installing the 5.07 OS
>version......will let you know the outcome ......
>
>   John leans toward it being a software issue, rather than a machine
>problem. It is possible that 5.07 and 4.02 in combination is causing this to
>happen. John is going to check with Jeff Banks for a follow up.
>
>   I will be looking forward to their input.
>   More later.
>
>   Rod Springer
>   Embroidery Cottage
>   Boise, ID
>
>
>   ----- Original Message -----
>   From: "Paul Tilton" <ptilton@xxxxxxxxx>
>   To: <amayausers@xxxxxxxxxxxxxxxx>; "Rod & Sharon"
><springer37@xxxxxxxxxxxx>
>   Sent: Wednesday, February 25, 2004 1:38 AM
>   Subject: Re: [amayausers] Amaya not centering properly
>
>
>   > I am NOT using the laser light to determine the center of the design. I
>sew the design in the "center" according to the software (both Design Shop
>and Amaya OS). Before I remove from the hoop I can see it is not on center,
>check it with a protractor and ruler, it is off! Remove from hoop, take
>measurements using the crease formed from the hoop for a more accurate
>measurement, it is about 2MM off to the right and 2MM low. Bizarre....
>   >
>   > Rod & Sharon <springer37@xxxxxxxxxxxx> wrote:Paul,
>   > Question. Are you using the laser light to center the design in the hoop
>   > ?
>   >
>   > I recently went to tech training in Denver and boy, did I learn a lot of
>   > really interesting stuff about these machines.
>   >
>   > The laser light, if relied on to find absolute center in the design can
>   > cause a problem IF it is not in the proper adjustment. Even when it is
>   > adjusted properly for center on flat stitching, trying to use it to
>trace a
>   > perfect stitch outline dosen't pan out either. This is especially true
>when
>   > using the hat driver because of the curved surface. The laser light gets
>you
>   > very close but can't be relied on it to be absolutely perfect...
>   >
>   >
>   >
>   >
>   > ----- Original Message -----
>   > From: "Paul Tilton"
>   >
>   > To:
>   > Sent: Tuesday, February 24, 2004 11:53 AM
>   > Subject: [amayausers] Amaya not centering properly
>   >
>   >
>   > > At first I thought is was an optical illusion, often my designs seemed
>   > to
>   > > be sewing a little bit right of center, so I did a test. I just
>created
>   > a
>   > > design, a simple circle outline, about the size of a quarter. I center
>   > it
>   > > using design shop, looks fine on the crosshairs, perfectly centered. I
>   > load
>   > > the design in Amaya OS, it looks a little low in the crosshairs, but
>   > > centering it doesn't change anything. I sew out the design, then get
>out
>   > my
>   > > ruler and protractor, sure enough the center of the design is about
>3mm
>   > > right and 3mm low of center of the hoop...
>   > >
>   > > I can adjust the starting position of the hoop before I sew to correct
>   > the
>   > > problem, but any ideas on why this is happening?
>   > >
>   > > Thanks...
>   > >
>   > >
>   > >
>   > > Paul Tilton
>   > > Sandhills Stitches
>   > > Whispering Pines, NC
>   > >
>   > >
>   > > ---------------------------------------------------------------------
>   > > To unsubscribe, e-mail: amayausers-unsubscribe@xxxxxxxxxxxxxxxx
>   > > For additional commands, e-mail: amayausers-help@xxxxxxxxxxxxxxxx
>   > >
>   > >
>   >
>   >
>   > ---------------------------------------------------------------------
>   > To unsubscribe, e-mail: amayausers-unsubscribe@xxxxxxxxxxxxxxxx
>   > For additional commands, e-mail: amayausers-help@xxxxxxxxxxxxxxxx
>   >
>   >
>   >
>   > ---------------------------------
>   > Do you Yahoo!?
>   > Yahoo! Mail SpamGuard - Read only the mail you want.
>
>
>---------------------------------------------------------------------
>To unsubscribe, e-mail: amayausers-unsubscribe@xxxxxxxxxxxxxxxx
>For additional commands, e-mail: amayausers-help@xxxxxxxxxxxxxxxx



Paul Tilton


---------------------------------------------------------------------
To unsubscribe, e-mail: amayausers-unsubscribe@xxxxxxxxxxxxxxxx
For additional commands, e-mail: amayausers-help@xxxxxxxxxxxxxxxx

Other related posts: