[amayausers.com] Re: Amaya & Non-Melco digitzing software; is it possible
- From: theboards@xxxxxxxxxxxxxx
- To: amayausers@xxxxxxxxxxxxx
- Date: Tue, 5 May 2009 16:45:24 UT
This message was posted by Rod or Sharon on AmayaUsers.com. PLEASE DO NOT REPLY
VIA EMAIL. Instead, respond to the thread on the WEBSITE by clicking here:
http://www.amayausers.com/boards/ultimatebb.php?/topic/1/680.html#000007
Pascale,
You need a monitor with the computer to use the Amaya software. You will be
able to operate certain functions of the machine from there also.
Yes, DST, EXP, CND, OFM and many other file formats are compatible for use.
The "buttons" on the machine is the machine keypad or "Interface Assembly" .
This is much more than a fine tuning device. It basically controls all the
movements and functions of the machine itself. It also has the Emergency Stop
button on it. You cannot start the machine running from the computer, the start
button must be pressed on the keypad.
Rod Springer
Amaya Tech & Trainer
===========================================================
The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list
===========================================================
Other related posts:
