[amayausers] Re: Amaya XT vs other machines, your thought

From: "Kesavan" <kesavan@xxxxxxxxxxxxxx>
To: <amayausers@xxxxxxxxxxxxx>
Date: Sat, 8 Apr 2006 05:45:27 +1000

I bought the Amaya XT because I was impressed by the size and shape of the
bobbin cassing assembly. Which will enable easier  stitiching on pockets
with a bigger sewing field and higher cap designs. The speed is an added
bonus for big jacket back designs.

Anand

-----Original Message-----
From: amayausers-bounce@xxxxxxxxxxxxx
[mailto:amayausers-bounce@xxxxxxxxxxxxx]On Behalf Of John Yaglenski
Sent: Saturday, 8 April 2006 1:24 AM
To: amayausers@xxxxxxxxxxxxx
Subject: [amayausers] Re: Amaya XT vs other machines, your thought


:We have not had any luck with the WACF.  It's almost impossible to get the
caps hooped correctly and then getting them to sew out ... well, I've gotten
one done!  It's a very frustrating and we have 100 hats to do.  I'm about
ready to throw in the towel on them.  One more try today and ...

Had the same problem here.  Got the CCF from hooptech (green one) with the
hooping gague and have had much better success - combined with using
actifeed and taking the wings off the cap driver.

http://www.hooptechproducts.com/

Follow-Ups:
- [amayausers] Hook Heating
  - From: Kesavan

References:
- [amayausers] Re: Amaya XT vs other machines, your thought
  - From: John Yaglenski

[amayausers] Re: Amaya XT vs other machines, your thought

Other related posts: