[amayausers] Re: Amaya Smoke

Same thing happened to one of ours, turns out the drive motors went bad, the
motor on the upper right hand side - inside the red cover.  

Thomas Buckner
tbuckner@xxxxxxxxxxx
www.ibistek.com


-----Original Message-----
From: amayausers-bounce@xxxxxxxxxxxxx
[mailto:amayausers-bounce@xxxxxxxxxxxxx] On Behalf Of Mike Garber
Sent: Monday, February 21, 2005 1:26 PM
To: amayausers list
Subject: [amayausers] Amaya Smoke

I'm new to the list and had a problem this morning.  I was wondering if 
anyone has experianced this:

I was doing a 4,000,000 stitch maint. on an Amaya I have had for almost 
1 year.
The machine was just sitting there after the oiling part of the 
maintenance and it started smoking.
The smoke started pouring out of the front of the machine and filled the 
office.  Before I could shut it down,  it went dead.  After the smoke 
cleared it did power back up but would not function.

Anybody?

Mike

Other related posts: