[amayausers] Re: Amaya Problem

Maybe your x-axis is fine but your hoop arms are crooked.  Consider
loosening the two set screws per arm and moving in the appropriate direction
a 1/4 of an inch.
Good luck,
Ed

Ed & Maralien Orantes
E.M. Broidery
900 Terry Parkway, Ste. 200
New Orleans, La. 70056
504-EMBROID ery (504-362-7643)

-----Original Message-----
From: amayausers-bounce@xxxxxxxxxxxxx
[mailto:amayausers-bounce@xxxxxxxxxxxxx]On Behalf Of Cindy@xxxxxxxxx
Sent: Saturday, June 25, 2005 5:44 PM
To: amayausers@xxxxxxxxxxxxx
Subject: [amayausers] Amaya Problem


Can anyone give me some help/direction?

My  X axis is 1/4" off center.  Was sewing my design, hoop limit did not
detect that I was too close and hit the hoop.

Design on screen is centered within my hoop limits and have centered the
hoop, but the X axis is still off.


Thanks in advance,
Cindy @ Finyl Vinyl

Other related posts: