This message was posted by Gini on AmayaUsers.com. PLEASE DO NOT REPLY VIA EMAIL. Instead, respond to the thread on the WEBSITE by clicking here: http://www.amayausers.com/boards/cgi-bin/ultimatebb.cgi?/topic/1/1237.html#000004 Just tried- no change. Another thing is, when these error boxes pop up, about 1 per second, if I click OK fast enough and clear all the boxes, I have less than a second to click another command which AMAYA executes aat least until the boxes pop up and diverts it. So for example I went into Design shop and asked it to load a new design. When it attempts to load the OS, the boxes start. If I click OK on al the boxes as they come up and get ahead of them, it loads the new design. Then, the hoop size was wrong so I clicked and clicked and after maybe 60 tries, I was able to change the hoop (but not to the oone I need, which is too far down the list to get to before the boxes start popping up again. SO,, it seems that the computer is communicating with the AMAYA, and recognizing commands, but something is triggering the error boxes conntinuously. We replaaced the ethernet hub and the wires, with no effect. We are running out of ideas. =========================================================== The AmayaUsers Mailing List Website: http://www.amayausers.com Discussion Board: http://www.amayausers.com/boards Subscribe/Unsubscribe: http://www.amayausers.com/list ===========================================================