[amayausers.com] Re: Alert that Bobbin almost out of thread

  • From: theboards@xxxxxxxxxxxxxx
  • To: amayausers@xxxxxxxxxxxxx
  • Date: Wed, 13 May 2009 18:05:00 UT

This message was posted by EarlsEmbroidery on AmayaUsers.com. PLEASE DO NOT 
REPLY VIA EMAIL. Instead, respond to the thread on the WEBSITE by clicking 
here: http://www.amayausers.com/boards/ultimatebb.php?/topic/2/935.html#000006

when the bobbin runs out, it stops and the machine does show -machine stopped 
for bobbin thread- or bobbin something but its always after it runs completely 
out and runs a few stitches without any bobbin thread which ends up leaving 
loose stitches that i then need to go back and stitch over again...this leaves 
a small raised area sometimes.  i want to know if the machine will tell me 
before its completely out of thread or is there a reading on the job somewhere 
that tells me that.  you r saying bobbin detection should be notifying me prior 
to the spool running out of thread?

=========================================================== 

The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list

=========================================================== 

Other related posts: