[amayausers] Re: Advice on settings for Hooptech system

Please let me know if you still need settings for the Hooptech and I'll get
them posted here- I just did ours again after loading the OS upgrade, so
they are a bit different from before. Hope it is going well for you-
-david O.
----- Original Message ----- 
From: <Pupcakesemb@xxxxxxx>
To: <amayausers@xxxxxxxxxxxxxxxx>
Sent: Friday, May 14, 2004 5:26 PM
Subject: [amayausers] Advice on settings for Hooptech system


> I have purchased an EMS/Hooptech clamping system--the smaller one---itCS1
and have the two cap sides, cap back, and a 4.5 inch square frames.  I need
advice on the appropriate settings to input in the Amaya OS.
>
> I recall that another member of this list has this system installed. I'm
hoping you will share your settings with me. (And,I hope to share this with
Melco so they can add it to their frequently asked questions data base!)
Many thanks!
>
> Pati Segar
> Patricia Segar Designs (formerly Pupcakes Embroidery)
> pupcakesemb@xxxxxxx
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: amayausers-unsubscribe@xxxxxxxxxxxxxxxx
> For additional commands, e-mail: amayausers-help@xxxxxxxxxxxxxxxx
>
>



---------------------------------------------------------------------
To unsubscribe, e-mail: amayausers-unsubscribe@xxxxxxxxxxxxxxxx
For additional commands, e-mail: amayausers-help@xxxxxxxxxxxxxxxx

Other related posts: