[amayausers] Re: Advice on settings for Hooptech system

Pati,
        Congratulations on your new name.  Sounds like you went
        frome cute to expensive.  Lots of luck!
Sincerely,
Tom
----- Original Message -----
From: <Pupcakesemb@xxxxxxx>
To: <amayausers@xxxxxxxxxxxxxxxx>
Sent: Friday, May 14, 2004 5:26 PM
Subject: [amayausers] Advice on settings for Hooptech system


> I have purchased an EMS/Hooptech clamping system--the smaller one---itCS1
and have the two cap sides, cap back, and a 4.5 inch square frames.  I need
advice on the appropriate settings to input in the Amaya OS.
>
> I recall that another member of this list has this system installed. I'm
hoping you will share your settings with me. (And,I hope to share this with
Melco so they can add it to their frequently asked questions data base!)
Many thanks!
>
> Pati Segar
> Patricia Segar Designs (formerly Pupcakes Embroidery)
> pupcakesemb@xxxxxxx
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: amayausers-unsubscribe@xxxxxxxxxxxxxxxx
> For additional commands, e-mail: amayausers-help@xxxxxxxxxxxxxxxx
>


---------------------------------------------------------------------
To unsubscribe, e-mail: amayausers-unsubscribe@xxxxxxxxxxxxxxxx
For additional commands, e-mail: amayausers-help@xxxxxxxxxxxxxxxx

Other related posts: