Pati, Are you looking for the offsets? I share the 4.5" but don't have the cap frames for mine, took the 2 pocket sizes and am still looking for offsets for the smaller one. If this is what you need let me know and I'll e-mail later today. Wendy Itchin' To Stitch MN >From: Pupcakesemb@xxxxxxx >Reply-To: amayausers@xxxxxxxxxxxxxxxx To: amayausers@xxxxxxxxxxxxxxxx >Subject: [amayausers] Advice on settings for Hooptech system >Date: Fri, 14 May 2004 17:26:08 -0400 > >I have purchased an EMS/Hooptech clamping system--the smaller one---itCS1 >and have the two cap sides, cap back, and a 4.5 inch square frames. I need >advice on the appropriate settings to input in the Amaya OS. > >I recall that another member of this list has this system installed. I'm >hoping you will share your settings with me. (And,I hope to share this with >Melco so they can add it to their frequently asked questions data base!) >Many thanks! > >Pati Segar >Patricia Segar Designs (formerly Pupcakes Embroidery) >pupcakesemb@xxxxxxx > > >--------------------------------------------------------------------- >To unsubscribe, e-mail: amayausers-unsubscribe@xxxxxxxxxxxxxxxx >For additional commands, e-mail: amayausers-help@xxxxxxxxxxxxxxxx > _________________________________________________________________ Check out the coupons and bargains on MSN Offers! http://youroffers.msn.com --------------------------------------------------------------------- To unsubscribe, e-mail: amayausers-unsubscribe@xxxxxxxxxxxxxxxx For additional commands, e-mail: amayausers-help@xxxxxxxxxxxxxxxx