[amayausers.com] Re: Acti-feed question - setting lower limits
- From: "Loyda" <Loyda2@xxxxxxxxxxx>
- To: <amayausers@xxxxxxxxxxxxx>
- Date: Fri, 14 Sep 2007 08:21:16 -0600
Hi there,
I bought my AMAYA about 1 1/2 years ago. I have version 7.00.055 and I do not
have the lower actifeed minimum. I just have a setting for material thickness,
but not for a minimum. When you find out the version, I would appreciate
knowing it. Thanks!
-Loyda
----- Original Message -----
From: Shuffletown Embroidery
To: amayausers@xxxxxxxxxxxxx
Sent: Friday, September 14, 2007 4:14 AM
Subject: [amayausers.com] Re: Acti-feed question - setting lower limits
Thanks Aaron, I will call him today. I looked for information and did not see
anything on the Melco support website. The latest release shown on the Amaya
Users website is 7.00.055, so that's probably it.
Mary
Mary Buckle
Shuffletown Embroidery
Charlotte, NC
704-398-1273
From: amayausers-bounce@xxxxxxxxxxxxx
[mailto:amayausers-bounce@xxxxxxxxxxxxx] On Behalf Of Linen Barn
Sent: Thursday, September 13, 2007 6:25 PM
To: amayausers@xxxxxxxxxxxxx
Subject: [amayausers.com] Re: Acti-feed question - setting lower limits
In AMAYA OS click on settings. Select the Thread Feed Tab. At the bottom is
a box for Autofeed Lower Limit I think is what it says. As far as version I
can't remember which version it came out in. I am a Beta tester so I get stuff
early to work out bugs so I have had this feature for a while now so its hard
to remember when it came out but I am thinking it was 7.055 but don't quote me
on this. I am now running 7.00.110 and I am not sure if this is a realeased
version or not but I think it may be. If nothing else call your sales rep and
see if you are eligible for the free upgrade or if you are past and have to
pay. Its worth a shot.
Aaron Sargent
The Linen Barn
linen@xxxxxxxxxxx
541-770-2957
Medford, OR
----- Original Message -----
From: Shuffletown Embroidery
To: amayausers@xxxxxxxxxxxxx
Sent: Thursday, September 13, 2007 3:01 PM
Subject: [amayausers.com] Acti-feed question - setting lower limits
I can't believe I sent this question with the wrong subject. Here it is
again. (see attached.)
Since I can't find anything in my help section, I must not have the correct
version of the software. I'm at 7.00.047.
Mary
Mary Buckle
Shuffletown Embroidery
Charlotte, NC
704-398-1273
From: amayausers-bounce@xxxxxxxxxxxxx
[mailto:amayausers-bounce@xxxxxxxxxxxxx] On Behalf Of Shuffletown Embroidery
Sent: Thursday, September 13, 2007 4:22 PM
To: amayausers@xxxxxxxxxxxxx
Subject: [amayausers.com] Re: Looking for camo (youth) in maroon, grey and
white
Hi everyone,
I was looking in the archives for the discussion about setting the lower
limit on acti-feed and haven't found it. Perhaps the discussion wasn't on the
board.
Could someone repost where that setting is and which software version?
Thanks,
Mary
Mary Buckle
Shuffletown Embroidery
Charlotte, NC
704-398-1273
Other related posts:
