[amayausers] Re: ARC Threads

I use mainly Robison-Anton thread.  I have been using it for many years and
got so used to the names I would find it hard to switch to another brand and
use numbers.  I do use some Madeira thread for certain colors I need and one
of my contract customers sends me Isacord and find it to run very well.  As
far as Arc goes,  I used to use their black and white but find Madeira to
run better, although with Madeira the cones don't fit on the machine without
extended bars that the thread sits on.

Aaron Sargent
The Linen Barn
linen@xxxxxxxxxxx
Medford, Oregon
----- Original Message ----- 
From: <embroideryexpress@xxxxxxxxxxx>
To: <amayausers@xxxxxxxxxxxxxxxx>
Sent: Sunday, May 23, 2004 7:45 PM
Subject: [amayausers] ARC Threads


> I have a digitizer who stopped by because my design was not sewing out
well...it was for him.  Discovered the mesh backing was creating some of the
registrations issues.  Then we decided the ARC thread MIGHT be responsible
for the lack of a good fill and regsitration.  Has anyone switched to
another brand because they were having issues with ARC...curious to hear
some response...privately if need be.
> Thanks,
> Shannon
> Embroidery Express
> Olney  MD
> embroideryexpress@xxxxxxxxxxx
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: amayausers-unsubscribe@xxxxxxxxxxxxxxxx
> For additional commands, e-mail: amayausers-help@xxxxxxxxxxxxxxxx
>
>



---------------------------------------------------------------------
To unsubscribe, e-mail: amayausers-unsubscribe@xxxxxxxxxxxxxxxx
For additional commands, e-mail: amayausers-help@xxxxxxxxxxxxxxxx

Other related posts: