[amayausers] Re: ARC Threads

Shannon, we purchased all the ARC colors they have when we got our Amaya.
We also use Isacord and have used Madeira.  All Polyester.  We've had our
machine almost two years now and have been pleased with all of them.  Once
in awhile you will get a cone that doesn't sew as well as all the
others---not sure if it has something to do with the dye in the thread or
not.  I do know that the humidity in the air plays an important part in our
threads.  It is wise to have a humidifier if you have dry air.  I like the
cones of the Isacord because it has the snap bottom on the cones but we use
all of them.
Sharon
----- Original Message ----- 
From: <embroideryexpress@xxxxxxxxxxx>
To: <amayausers@xxxxxxxxxxxxxxxx>
Sent: Sunday, May 23, 2004 8:45 PM
Subject: [amayausers] ARC Threads


> I have a digitizer who stopped by because my design was not sewing out
well...it was for him.  Discovered the mesh backing was creating some of the
registrations issues.  Then we decided the ARC thread MIGHT be responsible
for the lack of a good fill and regsitration.  Has anyone switched to
another brand because they were having issues with ARC...curious to hear
some response...privately if need be.
> Thanks,
> Shannon
> Embroidery Express
> Olney  MD
> embroideryexpress@xxxxxxxxxxx
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: amayausers-unsubscribe@xxxxxxxxxxxxxxxx
> For additional commands, e-mail: amayausers-help@xxxxxxxxxxxxxxxx
>
>


---------------------------------------------------------------------
To unsubscribe, e-mail: amayausers-unsubscribe@xxxxxxxxxxxxxxxx
For additional commands, e-mail: amayausers-help@xxxxxxxxxxxxxxxx

Other related posts: