[amayausers] Re: 4,000,000 stitch maintenance

 
Thank you. I don't think the picture in the manual is very clear.  It looked
to me like I should be using that black bottom piece to pry against. 
Evidently not! 

For something this important, shouldn't the pictures be bigger and clearer? 


----------------------------------------------------------------------------
From:  "Rod or Sharon" <springer37@xxxxxxxxxxxx>
Reply-To:  amayausers@xxxxxxxxxxxxx
To:  <amayausers@xxxxxxxxxxxxx>
Subject:  [amayausers] Re: 4,000,000 stitch maintenance
Date:  Sun, 6 May 2007 17:01:46 -0600
>Maureen,
>When they say pry the roller out, it is not meant to say that you use any
>part of the machine to pry against, especially plastic parts that are
>brittle in nature. You only use the screwdriver or drivers to lift , wiggle
>and pull up and outward until the roller comes free. Taking the red pinch
>rollers off, gives you more room.
>
>The "plastic' piece you are referring to is just one section of 16
>individual pods that the rollers fit into. Yes, it can be replaced, but it
>will mean a tech visit by a qualified tech to do it.
>
>Rod Springer
>Amaya Tech &Trainer
>
>----- Original Message -----
>From: "Maureen Kelly" <makelly30@xxxxxxxxxxx>
>To: <amayausers@xxxxxxxxxxxxx>
>Cc: <meezercity@xxxxxxxxxx>
>Sent: Sunday, May 06, 2007 4:39 PM
>Subject: [amayausers] Re: 4,000,000 stitch maintenance
>
>
>>
>>Thank you - I got the curved black covers off easily.  Then there is a
>>piece
>>of black plastic on the botton - that is what cracked from the
>>screwdriver.
>>I will try from the sides as you said.  The pictures are not very clear.
>>I
>>hope I can replace that cracked piece.
>>
>>
>>--------------------------------------------------------------------------
--
>>From:  "meezercity" <meezercity@xxxxxxxxxx>
>>Reply-To:  amayausers@xxxxxxxxxxxxx
>>To:  <amayausers@xxxxxxxxxxxxx>
>>Subject:  [amayausers] Re: 4,000,000 stitch maintenance
>>Date:  Sun, 6 May 2007 15:26:21 -0700
>>>First you have to remove the black pieces.  Put the little screwdriver in
>>>the slot in the bottom of the black piece and flip it up.  They click
>>>right
>>>out.  Then use the 2 screwdrivers on either side of the yellow roller to
>>>"pull" out.  It is the same kind of action as serving salad with 2 forks.
>>>They come out easy enough.  I always have trouble getting the black piece
>>>back needle number 1.
>>>
>>>
>>>
>>>-----Original Message-----
>>>From: amayausers-bounce@xxxxxxxxxxxxx
>>>[mailto:amayausers-bounce@xxxxxxxxxxxxx] On Behalf Of
>>>webmaster@xxxxxxxxxxxxxx
>>>Sent: Sunday, May 06, 2007 3:10 PM
>>>To: amayausers@xxxxxxxxxxxxx
>>>Subject: [amayausers] Re: 4,000,000 stitch maintenance
>>>
>>>This message was posted by Maureen on AmayaUsers.com. PLEASE DO NOT REPLY
>>>VIA EMAIL. Instead, respond to the thread on the WEBSITE by clicking
here:
>>>http://www.amayausers.com/boards/ultimatebb.php?/topic/1/91.html
>>>
>>>OK, not a good idea to do this on a Sunday evening I guess...
>>>I cannot get those yellow thread guides out.  By following the wonderful
>>>high-tech instructions in the manual which say, "Using 2 thin-blade
>>>screwdrivers ply the guide out" I was not only not able to get the guide
>>>out, the black PLASTIC piece in the front edge cracked!
>>>Any suggestions/advice about the correct way to get these out is
>>>appreciated.
>>>
>>>===========================================================
>>>
>>>The AmayaUsers Mailing List
>>>Website: http://www.amayausers.com
>>>Discussion Board: http://www.amayausers.com/boards
>>>Subscribe/Unsubscribe: http://www.amayausers.com/list
>>>
>>>===========================================================
>>>
>>>
>>>===========================================================
>>>
>>>The AmayaUsers Mailing List
>>>Website: http://www.amayausers.com
>>>Discussion Board: http://www.amayausers.com/boards
>>>Subscribe/Unsubscribe: http://www.amayausers.com/list
>>>
>>>===========================================================
>>
>>
>>--------------------------------------------------------------------------
--
>>Exercise your brain! Try Flexicon.[1]
>>
>>--- Links ---
>>   1 http://g.msn.com/8HMBENUS/2743??PS=47575
>>===========================================================
>>
>>The AmayaUsers Mailing List
>>Website: http://www.amayausers.com
>>Discussion Board: http://www.amayausers.com/boards
>>Subscribe/Unsubscribe: http://www.amayausers.com/list
>>
>>===========================================================
>
>===========================================================
>
>The AmayaUsers Mailing List
>Website: http://www.amayausers.com
>Discussion Board: http://www.amayausers.com/boards
>Subscribe/Unsubscribe: http://www.amayausers.com/list
>
>===========================================================


----------------------------------------------------------------------------
Download Messenger. Join the i?m Initiative. Help make a difference
today.[1]

--- Links ---
   1 http://g.msn.com/8HMBENUS/2740??PS=47575
=========================================================== 

The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list

=========================================================== 

Other related posts: