[amayausers] Re: 4,000,000 stitch maintenance

And one more thing......if you apply side pressue with the screwdriver(s) to 
the thin plastic separaters between each roller, they will break very 
easily---only hook onto the sides of the roller(s) and lift up and outward , 
kind of wiggling as you do it.

Rod Springer
----- Original Message ----- 
From: "Rod or Sharon" <springer37@xxxxxxxxxxxx>
To: <amayausers@xxxxxxxxxxxxx>
Sent: Sunday, May 06, 2007 5:01 PM
Subject: [amayausers] Re: 4,000,000 stitch maintenance


> Maureen,
> When they say pry the roller out, it is not meant to say that you use any
> part of the machine to pry against, especially plastic parts that are
> brittle in nature. You only use the screwdriver or drivers to lift , 
> wiggle
> and pull up and outward until the roller comes free. Taking the red pinch
> rollers off, gives you more room.
>
> The "plastic' piece you are referring to is just one section of 16
> individual pods that the rollers fit into. Yes, it can be replaced, but it
> will mean a tech visit by a qualified tech to do it.
>
> Rod Springer
> Amaya Tech & Trainer
>
> ----- Original Message ----- 
> From: "Maureen Kelly" <makelly30@xxxxxxxxxxx>
> To: <amayausers@xxxxxxxxxxxxx>
> Cc: <meezercity@xxxxxxxxxx>
> Sent: Sunday, May 06, 2007 4:39 PM
> Subject: [amayausers] Re: 4,000,000 stitch maintenance
>
>
>>
>> Thank you - I got the curved black covers off easily.  Then there is a
>> piece
>> of black plastic on the botton - that is what cracked from the
>> screwdriver.
>> I will try from the sides as you said.  The pictures are not very clear.
>> I
>> hope I can replace that cracked piece.
>>
>>
>> ----------------------------------------------------------------------------
>> From:  "meezercity" <meezercity@xxxxxxxxxx>
>> Reply-To:  amayausers@xxxxxxxxxxxxx
>> To:  <amayausers@xxxxxxxxxxxxx>
>> Subject:  [amayausers] Re: 4,000,000 stitch maintenance
>> Date:  Sun, 6 May 2007 15:26:21 -0700
>>>First you have to remove the black pieces.  Put the little screwdriver in
>>>the slot in the bottom of the black piece and flip it up.  They click
>>>right
>>>out.  Then use the 2 screwdrivers on either side of the yellow roller to
>>>"pull" out.  It is the same kind of action as serving salad with 2 forks.
>>>They come out easy enough.  I always have trouble getting the black piece
>>>back needle number 1.
>>>
>>>
>>>
>>>-----Original Message-----
>>>From: amayausers-bounce@xxxxxxxxxxxxx
>>>[mailto:amayausers-bounce@xxxxxxxxxxxxx] On Behalf Of
>>>webmaster@xxxxxxxxxxxxxx
>>>Sent: Sunday, May 06, 2007 3:10 PM
>>>To: amayausers@xxxxxxxxxxxxx
>>>Subject: [amayausers] Re: 4,000,000 stitch maintenance
>>>
>>>This message was posted by Maureen on AmayaUsers.com. PLEASE DO NOT REPLY
>>>VIA EMAIL. Instead, respond to the thread on the WEBSITE by clicking 
>>>here:
>>>http://www.amayausers.com/boards/ultimatebb.php?/topic/1/91.html
>>>
>>>OK, not a good idea to do this on a Sunday evening I guess...
>>>I cannot get those yellow thread guides out.  By following the wonderful
>>>high-tech instructions in the manual which say, "Using 2 thin-blade
>>>screwdrivers ply the guide out" I was not only not able to get the guide
>>>out, the black PLASTIC piece in the front edge cracked!
>>>Any suggestions/advice about the correct way to get these out is
>>>appreciated.
>>>
>>>===========================================================
>>>
>>>The AmayaUsers Mailing List
>>>Website: http://www.amayausers.com
>>>Discussion Board: http://www.amayausers.com/boards
>>>Subscribe/Unsubscribe: http://www.amayausers.com/list
>>>
>>>===========================================================
>>>
>>>
>>>===========================================================
>>>
>>>The AmayaUsers Mailing List
>>>Website: http://www.amayausers.com
>>>Discussion Board: http://www.amayausers.com/boards
>>>Subscribe/Unsubscribe: http://www.amayausers.com/list
>>>
>>>===========================================================
>>
>>
>> ----------------------------------------------------------------------------
>> Exercise your brain! Try Flexicon.[1]
>>
>> --- Links ---
>>   1 http://g.msn.com/8HMBENUS/2743??PS=47575
>> ===========================================================
>>
>> The AmayaUsers Mailing List
>> Website: http://www.amayausers.com
>> Discussion Board: http://www.amayausers.com/boards
>> Subscribe/Unsubscribe: http://www.amayausers.com/list
>>
>> ===========================================================
>
> ===========================================================
>
> The AmayaUsers Mailing List
> Website: http://www.amayausers.com
> Discussion Board: http://www.amayausers.com/boards
> Subscribe/Unsubscribe: http://www.amayausers.com/list
>
> =========================================================== 

=========================================================== 

The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list

=========================================================== 

Other related posts: