[accessibleimage] Re: Install a Tiger Emprint on a network
- From: John Gardner <john.gardner@xxxxxxxx>
- To: accessibleimage@xxxxxxxxxxxxx
- Date: Fri, 20 Nov 2009 13:58:56 -0800
That works, but a print server is lots more flexible. And they are not
very expensive any more.
John Gardner
On 11/20/2009 1:53 PM, Robert Jaquiss wrote:
Hello:
One option to try would be to install the Tiger on a computer and then
enable printer sharing. The down side to this solution is that the
computer you use must be on in order to get printouts on the Tiger.
Regards,
Robert Jaquiss
----- Original Message ----- From: "Yan Zhang" <yzhang@xxxxxxx>
To: <accessibleimage@xxxxxxxxxxxxx>; "ViewPlus Tiger Userlist"
<userlist@xxxxxxxxxxxxxxxxxx>
Sent: Friday, November 20, 2009 1:29 PM
Subject: [accessibleimage] Install a Tiger Emprint on a network
Hi all,
We have a ViewPlus Emprint embosser that we'd like to install on a
network. Both the setup instruction and embosser driver download page
mentioned network installation, just not in any detail. However, the
embosser only has a USB connection available, no Ethernet RJ45
connection. What do we need to install it on network and how to do it?
Many thanks,
Yan
Other related posts: