[access-uk] Re: wireless routers

  • From: "George Bell" <george@xxxxxxxxxxxxxxxxxxx>
  • To: <access-uk@xxxxxxxxxxxxx>
  • Date: Tue, 12 Oct 2004 12:38:02 +0100

They are around =C2=A3150, and worth every single hard earned
penny.

George.

> -----Original Message-----
> From: access-uk@xxxxxxxxxxxxx=20
> [mailto:access-uk@xxxxxxxxxxxxx] On Behalf Of Alex Stone
> Sent: 12 October 2004 09:50
> To: access-uk@xxxxxxxxxxxxx
> Subject: [access-uk] Re: wireless routers
>=20
> How much do they cost?
> Cheers.
> Alex
>=20
> -----Original Message-----
> From: access-uk@xxxxxxxxxxxxx=20
> [mailto:access-uk@xxxxxxxxxxxxx]On Behalf Of John Farley
> Sent: 11 October 2004 17:57
> To: access-uk@xxxxxxxxxxxxx
> Subject: [access-uk] Re: wireless routers
>=20
>=20
> Hi all,
>=20
> I have been using a Vigor 2600 WE for over 2 years now
with=20
> absolutely no issues at all. It is a wonderful piece of
kit=20
> and has a lot of features in I am sorry to say I don't
understand.
>=20
> The web interface works well with Window-eyes.
>=20
>=20
> Yesterday I took the plunge and decided that I needed to=20
> upgrade the firmware in it. I had never done this in the
past=20
> and so was a bit wary. I read up what was required on the=20
> Dratek support site and then went for it.
> It all worked like a charm.
>=20
> I am a convinced proponent of these routers; although they

> are more expensive that others.
>=20
>=20
>=20
>=20
>=20
>=20
>=20
> Regards, John
>=20
> Contact on : (Home)
> john_farley@xxxxxxxxxxxxxx
>         or : (work)
> john.farley@xxxxxxxx
>=20
> -----Original Message-----
> From: access-uk@xxxxxxxxxxxxx=20
> [mailto:access-uk@xxxxxxxxxxxxx] On Behalf Of George Bell
> Sent: 11 October 2004 12:03
> To: access-uk@xxxxxxxxxxxxx
> Subject: [access-uk] Re: wireless routers
>=20
> Hi Alex,
>=20
> Without doubt the Draytek Vigor 2600G.  In addition to a=20
> built in firewall, it has 4 wired ports, plus a USB
printer port.
>=20
> What is especially good is that if needs be, it can be set
up=20
> by someone else over the Internet, given that you have a=20
> fixed IP address of course.
> And believe me, I have been more than glad of that feature
on=20
> many occasions.
>=20
> George.=3D20
>=20
> > -----Original Message-----
> > From: access-uk@xxxxxxxxxxxxx=3D20
> > [mailto:access-uk@xxxxxxxxxxxxx] On Behalf Of Alex Stone
> > Sent: 11 October 2004 11:09
> > To: Org Access-Uk@Freelists.
> > Subject: [access-uk] wireless routers
> >=3D20
> > Guys, I'd like to buy a wireless router to connect my
> laptop=3D20
> > to the internet via broadband.  Does anybody have any=3D20

> >recommendations, including suppliers?
> > Cheers.
> > Alex
> >=3D20
> > ** To leave the list, send a message to:-
> > ** access-uk-request@xxxxxxxxxxxxx
> > ** and in the Subject line type
> > ** unsubscribe
> > ** For other list commands such as vacation mode, send a
> message, to
> > ** access-uk-request@xxxxxxxxxxxxx with the Subject:-
faq =3D20
>=20
>=20
> =3D0AThis Message has been scanned for viruses by McAfee
Groupshield.
> ** To leave the list, send a message to:-
> ** access-uk-request@xxxxxxxxxxxxx
> ** and in the Subject line type
> ** unsubscribe
> ** For other list commands such as vacation mode, send a
message, to
> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
>=20
> ** To leave the list, send a message to:-
> ** access-uk-request@xxxxxxxxxxxxx
> ** and in the Subject line type
> ** unsubscribe
> ** For other list commands such as vacation mode, send a
message, to
> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
>=20
>=20
>=20
> ** To leave the list, send a message to:-
> ** access-uk-request@xxxxxxxxxxxxx
> ** and in the Subject line type
> ** unsubscribe
> ** For other list commands such as vacation mode, send a
message, to
> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
>=20


=0AThis Message has been scanned for viruses by McAfee Groupshield.
** To leave the list, send a message to:-
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, send a message, to 
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq

Other related posts: