A SCART lead is a purely analogue affair therefore no digital from that. Assuming the digibox has any kind of digital sound output you will want either one of these two types of cable assuming your "sound bar" device has one as well. A TOSLINK optical cable Or A coaxial phono cable A good Hi-Fi shop or Maplin should be able to sell you one. Regards. Tristram Llewellyn Technical Support Sight and Sound Technology -----Original Message----- From: access-uk@xxxxxxxxxxxxx [mailto:access-uk@xxxxxxxxxxxxx] On Behalf Of dudleym@xxxxxxxxxxxx Sent: 05 September 2011 10:39 To: c Subject: [access-uk] scart lead with optical output? Hi I've just had my goodmans freeview box installed by the switchover team and all is working fine. However I would like to link this up to my audio soundbar to obtain a richer sound than from my TV. I heard on the list some time ago that a scart lead/plug is available with an optical output, I know nothing of these and whether they have an optical output incorporated into the scart to scart lead or whether I would need to plug it into the second scart socket on the freeview box. Can anyone out there give any advice. Thanks Martin ** To leave the list, click on the immediately-following link:- ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe] ** If this link doesn't work then send a message to: ** access-uk-request@xxxxxxxxxxxxx ** and in the Subject line type ** unsubscribe ** For other list commands such as vacation mode, click on the ** immediately-following link:- ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq] ** or send a message, to ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq ______________________________________________________________________ This email has been scanned by the MessageLabs Email Security System. For more information please visit http://www.messagelabs.com/email ______________________________________________________________________ ______________________________________________________________________ This email has been scanned by the MessageLabs Email Security System. For more information please visit http://www.messagelabs.com/email ______________________________________________________________________ ** To leave the list, click on the immediately-following link:- ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe] ** If this link doesn't work then send a message to: ** access-uk-request@xxxxxxxxxxxxx ** and in the Subject line type ** unsubscribe ** For other list commands such as vacation mode, click on the ** immediately-following link:- ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq] ** or send a message, to ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq