[access-uk] Re: preparing for clean installation of XP
- From: "Christopher Hallsworth" <chrishallsworth@xxxxxxxxxxxxxx>
- To: access-uk@xxxxxxxxxxxxx
- Date: Tue, 16 Jan 2007 17:53:38 +0000
In that case Andy you should ring S&S Technical Support and perhaps
request a new CD? Good luck.
On Tue, 16 Jan 2007 16:26:42 +0000, "Andy Collins"
<Andy@xxxxxxxxxxxxxxxxxxx> said:
> James - I've no activation cd, and no Braille authorisation number on
> the cd sleeves. I've only had one authorisation disc, and that was a
> floppy for version 3.5 [those good old days :]
>
> From what ohters are saying, I should be able to find out my
> activation number on-line as it was activated through the FS ILM
> method, maybe that's why I don't have an activation cd?
> -
> Andy
>
> On Tue Jan 16 15:42 , 'James O'Dell' <jamesodell@xxxxxxxxxxxx> sent:
>
> >Andy
> >
> >It's in the same packaging as the program CD, should say "auth CD"
> in both
> >print and braille on the CD sleave itself. Just stick that in your
> CD drive
> >after reinstallation and you should be fine. If you can't find the
> CD
> >itself, your authorisation number is in print and braille on your
> program CD
> >packaging, so you could get someone to read it for you or scan it.
> Failing
> >this, I would contact S and s with as much information as you can
> give them
> >e.g. JAWS serial number, and they should be able to give you your
> code.
> >
> >James
> >----- Original Message -----
> >From: "Andy Collins" Andy@xxxxxxxxxxxxxxxxxxx>
> >To: access-uk@xxxxxxxxxxxxx>
> >Sent: Tuesday, January 16, 2007 3:40 PM
> >Subject: [access-uk] Re: preparing for clean installation of XP
> >
> >
> >> Activation CD? All I seem to have are the audiol cds and the
> program
> >> cds? Am I missing somehting?
> >> -
> >> Andy
> >> On Tue Jan 16 15:04 , 'Mark Matthews' mark.matthews53@xxxxxxxxxxxx>
> >> sent:
> >>
> >>>Hi Andy.
> >>>
> >>>A bit late coming in on this one, but you will need your 20 digit
> >> code =
> >>>in
> >>>order to re-activate. Using your activation CD should guide you
> >> through
> >>>this, with all relevant codes already entered in. Just press the =
> >>>appropriate
> >>>buttons as directed, and all should be fine. HTH
> >>>
> >>>Cheers,
> >>>
> >>>Mark
> >>>
> >>>Mark Matthews
> >>>Cardiff, Wales, UK
> >>>E-mail/MSN/Windows Messenger: mark.matthews53@xxxxxxxxxxxx
> >>>Skype: MMatthews1981
> >>>Mobile: 07779 147874=20
> >>>
> >>>-----Original Message-----
> >>>From: access-uk@xxxxxxxxxxxxx [access-uk@xxxxxxxxxxxxx] On Behalf =
> >>>Of
> >>>Andy Collins
> >>>Sent: 15 January 2007 23:10
> >>>To: access-uk@xxxxxxxxxxxxx
> >>>Subject: [access-uk] Re: preparing for clean installation of XP
> >>>
> >>>
> >>>Hi Guys - After my reinstallation of XP, will I just need my
> >> serial=20
> >>>number to re-register JAWS, or will I have to find the 20 digit=20
> >>>authorisation code, and or my computer's locking code?
> >>>-
> >>>Andy
> >>>
> >>>On Mon Jan 15 22:40 , 'Andrew Hodgson' andrew@xxxxxxxxxxxxxxxxx>=20
> >>>sent:
> >>>
> >>>>Hi Amro,
> >>>>
> >>>>Agree with you re the Program Files directory.
> >>>>
> >>>>The question I had is regarding the remove license information
> >>>option in
> >>>>Jaws Tools menu. Does this actually return a token back to the
> >> FS=20
> >>>>server, or just remove the authorisation code from the hard drive?
> >> I=20
> >>>>thought it only did the later, and so never bothered with it,
> >> always=20
> >>>>renewing the license when I needed to do a fresh install from=20
> >>>>fsactivate.com, then reseting the activation numbers (as it was
> >>>usually
> >>>>1).
> >>>>
> >>>>Andrew.
> >>>>
> >>>>-----Original Message-----
> >>>>From: access-uk@xxxxxxxxxxxxx [access-uk@xxxxxxxxxxxxx] On Behalf
> >> Of=20
> >>>>Amro Bilal
> >>>>Sent: 15 January 2007 22:35
> >>>>To: access-uk@xxxxxxxxxxxxx
> >>>>Subject: [access-uk] Re: preparing for clean installation of XP
> >>>>
> >>>>Hi Andy,
> >>>>
> >>>>In addition to what people have said, you can remove the
> >> activation=20
> >>>>license=3D20 code from your computer before formatting. To do
> this,
> >> =
> >>>open=20
> >>>>the Start menu=3D20
> >>>>and go to the JAWS program group. Then, open the Tools submenu and
> >>>>choose=3D20
> >>>>Remove Product Activation.
> >>>>
> >>>>The other thing, you said,
> >>>>
> >>>>"I've been looking
> >>>>through my installed programmes, and I've got several programme
> >> files I =
> >>>
> >>>>have backed up".
> >>>>
> >>>>If I may ask, why did you pack up files from the (C:\Program
> Files\)
> >>>=3D20
> >>>>directory? How are you going to use these files after the new
> >> XP=3D20=20
> >>>>installation? My understanding that these files are used by the=20
> >>>>operating=3D20 system for the installed programs to function, and
> >> you=20
> >>>>shouldn't, generally,=3D20
> >>>>mess up with them. They will be freshly created when you
> >> reinstall=20
> >>>your=3D20
> >>>>programs after the reinstallation of XP. I've never had to pack up
> >>>any
> >>>>of=3D20
> >>>>these files before formatting my hard drive. Unless you want to
> back
> >>>up
> >>>>your=3D20
> >>>>Jaws Bookmarks - you can do that using the Jaws Settings
> Packager=20
> >>>>utility as=3D20 well.
> >>>>
> >>>>My two pence worth!
> >>>>
> >>>>Cheers,
> >>>>Amro
> >>>>----- Original Message -----=3D20
> >>>>From: "Andy Collins" Andy@xxxxxxxxxxxxxxxxxxx>
> >>>>To: access-uk@xxxxxxxxxxxxx>
> >>>>Sent: Monday, January 15, 2007 4:52 PM
> >>>>Subject: [access-uk] preparing for clean installation of XP
> >>>>
> >>>>
> >>>>> Hi all -
> >>>>>
> >>>>> I've backed up all it seems I can in readiness for a clean
> >>>reinstall
> >>>>> of XP. Will this affect JAWS registration? Also, I've been
> >> looking=20
> >>>>> through my installed programmes, and I've got several programme
> >>>files
> >>>>> I have backed up, but I wonder about things like things such as
> >> my=20
> >>>>> sound card, for which I have no installation cd, and therefore,
> >> no=20
> >>>>> driver files. Do I need to worry about this? Also, I have a
> >> version=20
> >>>>> of MS Word2000 that I would like to reinstall; the original=20
> >>>>> installation for this was as an oem licence on an earlier PC, so
> >> I=20
> >>>>> don't have a user licence code for it, evne though it is legally
> >>>mine
> >>>>> to use. Any way I can copy or back this up so as to reinstall
> >> it=20
> >>>>> after installing XP again?
> >>>>>
> >>>>> Regards -
> >>>>> Andy
> >>>>> ** To leave the list, click on the immediately-following link:-
> >>>>> ** [access-uk-request@xxxxxxxxxxxxx?subject=3D3Dunsubscribe]
> >>>>> ** If this link doesn't work then send a message to:
> >>>>> ** access-uk-request@xxxxxxxxxxxxx
> >>>>> ** and in the Subject line type
> >>>>> ** unsubscribe
> >>>>> ** For other list commands such as vacation mode, click on the
> >>>>> ** immediately-following link:-
> >>>>> ** [access-uk-request@xxxxxxxxxxxxx?subject=3D3Dfaq]
> >>>>> ** or send a message, to
> >>>>> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
> >>>>>
> >>>>>=3D20
> >>>>
> >>>>** To leave the list, click on the immediately-following link:-
> >>>>** [access-uk-request@xxxxxxxxxxxxx?subject=3D3Dunsubscribe]
> >>>>** If this link doesn't work then send a message to:
> >>>>** access-uk-request@xxxxxxxxxxxxx
> >>>>** and in the Subject line type
> >>>>** unsubscribe
> >>>>** For other list commands such as vacation mode, click on the
> >>>>** immediately-following link:-
> >>>>** [access-uk-request@xxxxxxxxxxxxx?subject=3D3Dfaq]
> >>>>** or send a message, to
> >>>>** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
> >>>>
> >>>>** To leave the list, click on the immediately-following link:-
> >>>>** [access-uk-request@xxxxxxxxxxxxx?subject=3Dunsubscribe]
> >>>>** If this link doesn't work then send a message to:
> >>>>** access-uk-request@xxxxxxxxxxxxx
> >>>>** and in the Subject line type
> >>>>** unsubscribe
> >>>>** For other list commands such as vacation mode, click on the
> >>>>** immediately-following link:-
> >>>>** [access-uk-request@xxxxxxxxxxxxx?subject=3Dfaq]
> >>>>** or send a message, to
> >>>>** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
> >>>>
> >>>>
> >>>>--
> >>>>This email has been verified as Virus free
> >>>>Virus Protection and more available at http://www.plus.net
> >>>
> >>>** To leave the list, click on the immediately-following link:-
> >>>** [access-uk-request@xxxxxxxxxxxxx?subject=3Dunsubscribe]
> >>>** If this link doesn't work then send a message to:
> >>>** access-uk-request@xxxxxxxxxxxxx
> >>>** and in the Subject line type
> >>>** unsubscribe
> >>>** For other list commands such as vacation mode, click on the
> >>>** immediately-following link:-
> >>>** [access-uk-request@xxxxxxxxxxxxx?subject=3Dfaq]
> >>>** or send a message, to
> >>>** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
> >>>
> >>>
> >>>
> >>>** To leave the list, click on the immediately-following link:-
> >>>** [access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
> >>>** If this link doesn't work then send a message to:
> >>>** access-uk-request@xxxxxxxxxxxxx
> >>>** and in the Subject line type
> >>>** unsubscribe
> >>>** For other list commands such as vacation mode, click on the
> >>>** immediately-following link:-
> >>>** [access-uk-request@xxxxxxxxxxxxx?subject=faq]
> >>>** or send a message, to
> >>>** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
> >>>
> >>>
> >>>--
> >>>This email has been verified as Virus free
> >>>Virus Protection and more available at http://www.plus.net
> >>
> >> ** To leave the list, click on the immediately-following link:-
> >> ** [access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
> >> ** If this link doesn't work then send a message to:
> >> ** access-uk-request@xxxxxxxxxxxxx
> >> ** and in the Subject line type
> >> ** unsubscribe
> >> ** For other list commands such as vacation mode, click on the
> >> ** immediately-following link:-
> >> ** [access-uk-request@xxxxxxxxxxxxx?subject=faq]
> >> ** or send a message, to
> >> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
> >>
> >
> >** To leave the list, click on the immediately-following link:-
> >** [access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
> >** If this link doesn't work then send a message to:
> >** access-uk-request@xxxxxxxxxxxxx
> >** and in the Subject line type
> >** unsubscribe
> >** For other list commands such as vacation mode, click on the
> >** immediately-following link:-
> >** [access-uk-request@xxxxxxxxxxxxx?subject=faq]
> >** or send a message, to
> >** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
> >
> >
> >--
> >This email has been verified as Virus free
> >Virus Protection and more available at http://www.plus.net
>
> ** To leave the list, click on the immediately-following link:-
> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
> ** If this link doesn't work then send a message to:
> ** access-uk-request@xxxxxxxxxxxxx
> ** and in the Subject line type
> ** unsubscribe
> ** For other list commands such as vacation mode, click on the
> ** immediately-following link:-
> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
> ** or send a message, to
> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
>
Christopher Hallsworth
Skype name chrishallsworth7266
** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
Other related posts:
