[access-uk] Re: link to firmware upgrade for DM5
- From: "Adrien Collins" <adriencollins22160@xxxxxxxxxxxxxx>
- To: <access-uk@xxxxxxxxxxxxx>
- Date: Fri, 13 May 2011 23:25:54 +0200
Hi John
When I tried to install the firmware the first two times, it
installed the fist part ok but when I ran the second
installation, it got to 15 percent and stopped, I checked to
see what the problem was and as I said the memory card was
set as my memory, I switched it to the internal memory and
it went in no problem. I watched the counter go upto 100
percent. And yes I checked the version, it says version 1.2,
it was on 1.1 before.
Ok thanks for the quick run down on the changes, I tried to
suss out he audio diary but haven't worked it out yet, do I
just speak to it like I can when changing the time? And I
wish we could copy music to it without having to use windows
media player. I tried copying a book on to the dm and it
hasn't found it yet. Not quite sure why, I put it in several
folders, audio or daisy, I think we need to use the sonority
to do that. I'll gradually work it out.
Regards
Adrien
-----Original Message-----
From: access-uk@xxxxxxxxxxxxx
[mailto:access-uk@xxxxxxxxxxxxx] On Behalf Of john coley
Sent: 13 May 2011 23:18
To: access-uk@xxxxxxxxxxxxx
Subject: [access-uk] Re: link to firmware upgrade for DM5
Hi Adrien, are you sure you've installed it? It wouldn't
have gone onto the flash card. If you check in
preferences/system menu/system information what system
version does it say? If you've installed it it will say
1.20.
What concerns me is what you said about it installing to
the flash card.
It doesn't. It's not like the victor stream, where it
installs from the card. It's a programme. You click on the
executable and it runs the install.
It does it twice, then gitells you when to disconnect the
unit.
In the new firmware they still haven't fixed the daisy.
They've included support for usb microphones and speakers. I
haven't checked that bit out but Tony, who is also on the
list has. It enables you to use the dm5 as a USB microphone
on your pc. Other than for that there are some improvements
to the audio diary, at least I suspect that's what the other
things referred to on the list of inclusions are.
John.
----- Original Message -----
From: "Adrien Collins" <adriencollins22160@xxxxxxxxxxxxxx>
To: <access-uk@xxxxxxxxxxxxx>
Sent: Friday, May 13, 2011 10:01 PM
Subject: [access-uk] Re: link to firmware upgrade for DM5
> Hi John
>
> Ok I must have misread it in the release notes, well it
> worked ok. Are there any major differences in the new
> software?
>
>
> Regards
>
> Adrien
>
>
> -----Original Message-----
> From: access-uk@xxxxxxxxxxxxx
> [mailto:access-uk@xxxxxxxxxxxxx] On Behalf Of john coley
> Sent: 13 May 2011 22:50
> To: access-uk@xxxxxxxxxxxxx
> Subject: [access-uk] Re: link to firmware upgrade for DM5
>
> Hi Adrien, you've got that the wrong way round. If you
check
> you'll find that the mac file is the small one. The XP
file
> is 48 megs. I know. I've got it here.
> John.
>
> ----- Original Message -----
> From: "Adrien Collins" <adriencollins22160@xxxxxxxxxxxxxx>
> To: <access-uk@xxxxxxxxxxxxx>
> Sent: Friday, May 13, 2011 9:36 PM
> Subject: [access-uk] Re: link to firmware upgrade for DM5
>
>
>> Hi John
>>
>> I downloaded the file that was highlighted on the
webpage,
>> it worked ok and it was 46 mb. In the release notes it
> said
>> that the large file was for mac and the small file for
xp.
>> Confusing.
>>
>>
>> Regards
>>
>> Adrien
>>
>>
>> -----Original Message-----
>> From: access-uk@xxxxxxxxxxxxx
>> [mailto:access-uk@xxxxxxxxxxxxx] On Behalf Of john coley
>> Sent: 13 May 2011 19:19
>> To: access-uk@xxxxxxxxxxxxx
>> Subject: [access-uk] Re: link to firmware upgrade for DM5
>>
>> Adrien, what are you confused about? On that page the
> update
>> is listed as being for the dm3 and dm5. It is a single 48
>> meg executable.
>> There is I think a Mac version on there, but it's only
25
>> megs or so.
>> What is the file you downloaded called, and how big is
> it?
>> John.
>> ----- Original Message -----
>> From: "Adrien Collins"
<adriencollins22160@xxxxxxxxxxxxxx>
>> To: <access-uk@xxxxxxxxxxxxx>
>> Sent: Friday, May 13, 2011 6:11 PM
>> Subject: [access-uk] Re: link to firmware upgrade for DM5
>>
>>
>>> Hi
>>>
>>> I am very confused, I have just spent hours downloading
>> this up-date
>>> for my dm5 but I use xp, have I downloaded the wrong
> file?
>>>
>>>
>>> Regards
>>>
>>> Adrien
>>>
>>>
>>> -----Original Message-----
>>> From: access-uk@xxxxxxxxxxxxx
>>> [mailto:access-uk@xxxxxxxxxxxxx] On Behalf Of john coley
>>> Sent: 12 May 2011 15:52
>>> To: access-uk@xxxxxxxxxxxxx
>>> Subject: [access-uk] link to firmware upgrade for DM5
>>>
>>> Hi everybody, I've just had the below link to the latest
>> firmware for
>>> the DM5, taking it from 1.10 to 1.20. The release notes
>> are also on
>>> the page as a downloadable PDF.
>>> The page is in german, but the link text is english.
>>> John.
>>>
>>
>
http://www.olympus.de/diktiergeraete/software.cfm?category=1
>>> 0&productgroup=347&product=456&os=7&result
>>>
>>> ** To leave the list, click on the immediately-following
>>> link:-
>>> **
>>>
>>
>
[mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
>>> ** If this link doesn't work then send a message to:
>>> ** access-uk-request@xxxxxxxxxxxxx
>>> ** and in the Subject line type
>>> ** unsubscribe
>>> ** For other list commands such as vacation mode, click
> on
>> the
>>> ** immediately-following link:-
>>> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
>>> ** or send a message, to
>>> ** access-uk-request@xxxxxxxxxxxxx with the Subject:-
faq
>>>
>>> ** To leave the list, click on the immediately-following
>> link:-
>>> **
>>
>
[mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
>>> ** If this link doesn't work then send a message to:
>>> ** access-uk-request@xxxxxxxxxxxxx
>>> ** and in the Subject line type
>>> ** unsubscribe
>>> ** For other list commands such as vacation mode, click
> on
>> the
>>> ** immediately-following link:-
>>> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
>>> ** or send a message, to
>>> ** access-uk-request@xxxxxxxxxxxxx with the Subject:-
faq
>>>
>>
>> ** To leave the list, click on the immediately-following
>> link:-
>> **
>>
>
[mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
>> ** If this link doesn't work then send a message to:
>> ** access-uk-request@xxxxxxxxxxxxx
>> ** and in the Subject line type
>> ** unsubscribe
>> ** For other list commands such as vacation mode, click
on
>> the
>> ** immediately-following link:-
>> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
>> ** or send a message, to
>> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
>>
>> ** To leave the list, click on the immediately-following
> link:-
>> **
>
[mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
>> ** If this link doesn't work then send a message to:
>> ** access-uk-request@xxxxxxxxxxxxx
>> ** and in the Subject line type
>> ** unsubscribe
>> ** For other list commands such as vacation mode, click
on
> the
>> ** immediately-following link:-
>> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
>> ** or send a message, to
>> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
>>
>
> ** To leave the list, click on the immediately-following
> link:-
> **
>
[mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
> ** If this link doesn't work then send a message to:
> ** access-uk-request@xxxxxxxxxxxxx
> ** and in the Subject line type
> ** unsubscribe
> ** For other list commands such as vacation mode, click on
> the
> ** immediately-following link:-
> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
> ** or send a message, to
> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
>
> ** To leave the list, click on the immediately-following
link:-
> **
[mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
> ** If this link doesn't work then send a message to:
> ** access-uk-request@xxxxxxxxxxxxx
> ** and in the Subject line type
> ** unsubscribe
> ** For other list commands such as vacation mode, click on
the
> ** immediately-following link:-
> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
> ** or send a message, to
> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
>
** To leave the list, click on the immediately-following
link:-
**
[mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on
the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
Other related posts:
