[access-uk] Re: link to firmware upgrade for DM5

  • From: "john coley" <johncoley@xxxxxxxxxxxxxxxx>
  • To: <access-uk@xxxxxxxxxxxxx>
  • Date: Fri, 13 May 2011 22:17:54 +0100

Hi Adrien, are you sure you've installed it? It wouldn't have gone onto the flash card. If you check in preferences/system menu/system information what system version does it say? If you've installed it it will say 1.20. What concerns me is what you said about it installing to the flash card. It doesn't. It's not like the victor stream, where it installs from the card. It's a programme. You click on the executable and it runs the install. It does it twice, then gitells you when to disconnect the unit. In the new firmware they still haven't fixed the daisy. They've included support for usb microphones and speakers. I haven't checked that bit out but Tony, who is also on the list has. It enables you to use the dm5 as a USB microphone on your pc. Other than for that there are some improvements to the audio diary, at least I suspect that's what the other things referred to on the list of inclusions are.

                   John.

----- Original Message ----- From: "Adrien Collins" <adriencollins22160@xxxxxxxxxxxxxx>
To: <access-uk@xxxxxxxxxxxxx>
Sent: Friday, May 13, 2011 10:01 PM
Subject: [access-uk] Re: link to firmware upgrade for DM5


Hi John

Ok I must have misread it in the release notes, well it
worked ok. Are there any major differences in the new
software?


Regards

Adrien


-----Original Message-----
From: access-uk@xxxxxxxxxxxxx
[mailto:access-uk@xxxxxxxxxxxxx] On Behalf Of john coley
Sent: 13 May 2011 22:50
To: access-uk@xxxxxxxxxxxxx
Subject: [access-uk] Re: link to firmware upgrade for DM5

Hi Adrien, you've got that the wrong way round. If you check
you'll find that the mac file is the small one. The XP file
is 48 megs. I know. I've got it here.
                   John.

----- Original Message -----
From: "Adrien Collins" <adriencollins22160@xxxxxxxxxxxxxx>
To: <access-uk@xxxxxxxxxxxxx>
Sent: Friday, May 13, 2011 9:36 PM
Subject: [access-uk] Re: link to firmware upgrade for DM5


Hi John

I downloaded the file that was highlighted on the webpage,
it worked ok and it was 46 mb. In the release notes it
said
that the large file was for mac and the small file for xp.
Confusing.


Regards

Adrien


-----Original Message-----
From: access-uk@xxxxxxxxxxxxx
[mailto:access-uk@xxxxxxxxxxxxx] On Behalf Of john coley
Sent: 13 May 2011 19:19
To: access-uk@xxxxxxxxxxxxx
Subject: [access-uk] Re: link to firmware upgrade for DM5

Adrien, what are you confused about? On that page the
update
is listed as being for the dm3 and dm5. It is a single 48
meg executable.
 There is I think a Mac version on there, but it's only 25
megs or so.
 What is the file you downloaded called, and how big is
it?
                   John.
----- Original Message -----
From: "Adrien Collins" <adriencollins22160@xxxxxxxxxxxxxx>
To: <access-uk@xxxxxxxxxxxxx>
Sent: Friday, May 13, 2011 6:11 PM
Subject: [access-uk] Re: link to firmware upgrade for DM5


Hi

I am very confused, I have just spent hours downloading
this up-date
for my dm5 but I use xp, have I downloaded the wrong
file?


Regards

Adrien


-----Original Message-----
From: access-uk@xxxxxxxxxxxxx
[mailto:access-uk@xxxxxxxxxxxxx] On Behalf Of john coley
Sent: 12 May 2011 15:52
To: access-uk@xxxxxxxxxxxxx
Subject: [access-uk] link to firmware upgrade for DM5

Hi everybody, I've just had the below link to the latest
firmware for
the DM5, taking it from 1.10 to 1.20. The release notes
are also on
the page as a downloadable PDF.
The page is in german, but the link text is english.
                   John.


http://www.olympus.de/diktiergeraete/software.cfm?category=1
0&productgroup=347&product=456&os=7&result

** To leave the list, click on the immediately-following
link:-
**


[mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click
on
the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq

** To leave the list, click on the immediately-following
link:-
**

[mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click
on
the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq


** To leave the list, click on the immediately-following
link:-
**

[mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on
the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq

** To leave the list, click on the immediately-following
link:-
**
[mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on
the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq


** To leave the list, click on the immediately-following
link:-
**
[mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on
the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq

** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq


** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq

Other related posts: