[access-uk] Re: basic embossers

I think we can discount all but the last 3. But I'm surprised you have
two USB002 ports.

I assume you've still got the "Braille Embosser" set up as
Generic/Text only printer in your list of printers.

Suggest you try changing the Port of that device to each of the last
three in turn, and try printing from Notepad.

If all else fails - so you know who supplied the embosser originally?

George.

-----Original Message-----
From: access-uk@xxxxxxxxxxxxx [mailto:access-uk@xxxxxxxxxxxxx] On
Behalf Of brian williams
Sent: 15 September 2009 21:06
To: access-uk@xxxxxxxxxxxxx
Subject: [access-uk] Re: basic embossers

Hi George
 following your instructions, there are 13 ports when the printer was
disconected. When reconecting, there still 13 ports as listed below:
lpt1
lpt2
lpt3
com1 serial port
com2 serial port
com3 serial port
com4 serial port
file: print to file
kesi virtual port local port
kesifax  local port
usb002 virtual printer port for usb
usb002 virtual printer port for usb
printer xbs port local port

Wdisconecting the cable and reconecting the PC acknowledges that
hardware is being conected.
Brian 

** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq

 

__________ Information from ESET NOD32 Antivirus, version of virus
signature database 4425 (20090914) __________

The message was checked by ESET NOD32 Antivirus.

http://www.eset.com
 
 

__________ Information from ESET NOD32 Antivirus, version of virus
signature database 4425 (20090914) __________

The message was checked by ESET NOD32 Antivirus.

http://www.eset.com
 
** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq

Other related posts: