[access-uk] basic embossers

Hi
I have a second hand index basic S embosser which used to run well using Cipher braille translator. This was before I changed my PC from XP to XP pro. Now, I have tried using Cipher, Winbrailee 5, and a trial version of Braile maker. I cannot get the embosser to print. If I press the help button on the embosser, it embosses the test sheet OK. Does anyone have any idea what the problem might be? If it helps it says "basic ready, 4.0" when i switch it on. Advice would be much appreciated.
Brian
----- Original Message ----- From: "Tristram Llewellyn" <tristram.llewellyn@xxxxxxxxxxxxxxxxxxx>
To: <access-uk@xxxxxxxxxxxxx>
Sent: Tuesday, September 08, 2009 10:51 AM
Subject: [access-uk] Re: mobile phones


Unless anyone has more up to date information this is the position as I
understand it.

The sound on the N86 will compare very favourably with the N95 which
wasn't at all bad anyway, I can at least verify that by my own ears.
There are still some issues however which is where potentially there is
a moving target.  Depending on what you are going to use the phone for
they may or may not be issues.  Areas that remain to be fixed include
the calendar application, email client and the menus in the photos
application.

In large part this is due to Nokia using a new custom control in these
areas which TALKS doesn't pick up.  Hopefully they can find a way of
recovering information from it soon so these areas will talk.  Otherwise
it is a nice phone to have if you like that sort of design.

Regards.

Tristram Llewellyn
Sight and Sound Technology
Technical Support
www.sightandsound.co.uk

Mail:
Tristram: tristram.llewellyn@xxxxxxxxxxxxxxxxxxx
Technical: Support@xxxxxxxxxxxxxxxxxxx
General - info@xxxxxxxxxxxxxxxxxxx

Phone:
Support line: 0845 634 7979

Sight and Sound Technology Limited is a company registered in England
and Wales, with company number 1408275.

Sight and Sound Technology
Welton House North Wing
Summerhouse Road
Moulton Park
Northampton
NN3 6WD

VAT Number - GB 860 2121 66.


-----Original Message-----
From: access-uk@xxxxxxxxxxxxx [mailto:access-uk@xxxxxxxxxxxxx] On Behalf
Of brendan
Sent: 08 September 2009 10:08
To: access-uk@xxxxxxxxxxxxx
Subject: [access-uk] mobile phones

Hi Folk,
Does anyone have the N86 and if so, would you happen to know how does
the sound quality compare with the n95 and is talksfully functional with
it?
Cheers Brendan


** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq


______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please visit http://www.messagelabs.com/email
______________________________________________________________________
** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq


** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq

Other related posts: