[access-uk] Re: Wireless connection?

Yusuf,
Mak  address is not required in the network.  But, I set increaption to 64
bit.  This may cause the problem.
 

Thank you.

--------------------

Ali 

-----Original Message-----
From: access-uk@xxxxxxxxxxxxx [mailto:access-uk@xxxxxxxxxxxxx] On Behalf Of
yusuf
Sent: 22 May 2005 12:55
To: access-uk@xxxxxxxxxxxxx
Subject: [access-uk] Re: Wireless connection?


Hi Ali, Not sure if this will help but, my network is set up to only allow 
computers where I have input the Mak address. If yours is setup in the same 
way you will need to find out the Mak address of your laptop's wireless card

and input it in to your network software.

Yusuf
----- Original Message ----- 
From: "Ali" <alpot@xxxxxxxxxxxxxxxx>
To: "access" <access-uk@xxxxxxxxxxxxx>
Sent: Sunday, May 22, 2005 12:40 PM
Subject: [access-uk] Wireless connection?


> Hi,
> I just received  my new laptop, the following is the spec: ITS Z2300 
> Windows Notebook Computer : Intel Pentium M 725 (1.6 GHz), 512 Mb
> PC2700 DDR-RAM, 40 Gb IDE Hard Drive, DVD-RW/CD-RW Drive, Intel Integrated
> 3D Graphics, 12.1" TFT display, Onboard 10/100 Ethernet, 3x USB 2.0 ports,
> 1x IEEE 1394 port, Wireless LAN 802.11g built-in, Internal 56K Voice/Fax
> Modem, Windows XP Home
>
> However, the problem is I cannot get it to see my network at home.  If 
> I
> use
> external wireless card, I can get it work in the network, but I cannot
> connect it with the inbuilt wireless card.  I also cannot set increaption 
> on
> this laptop.  Does anyone have any suggestion?  I have changed the work
> group name and discription and I enter the SSID correctly.  I am not sure
> where to search now.
>
> Thank you.
>
> --------------------
>
> Ali
>
> ** To leave the list, click on the immediately-following link:-
> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
> ** If this link doesn't work then send a message to:
> ** access-uk-request@xxxxxxxxxxxxx
> ** and in the Subject line type
> ** unsubscribe
> ** For other list commands such as vacation mode, click on the
> ** immediately-following link:-
> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
> ** or send a message, to
> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
>
> 

** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq



** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq

Other related posts: