[access-uk] Re: Window-eyes and Outlook 2003.

Hi Steve,

Many thanks for your reply.  Everything was set up correctly.  I did find
the problem.  I have a bit of sight, and my screen was set to high contrast
black.  As soon as I changed it to Windows standard outlook started
behaving.  So it looks as if Window-eyes works better with the default
colour scheme.

Can the set files be modified in the demo to handle the high contrast black
colour scheme

Andrew 

-----Original Message-----
From: access-uk@xxxxxxxxxxxxx [mailto:access-uk@xxxxxxxxxxxxx] On Behalf Of
Steve Nutt
Sent: 29 January 2007 21:13
To: access-uk@xxxxxxxxxxxxx
Subject: [access-uk] Re: Window-eyes and Outlook 2003.

Hi Andrew,

No, but make sure that Outlook is set up right.  Please do the following:-

1.  Go to the Window-Eyes file menu.

2.  Press F for Factory Defaults.

3.  Press O until you hear Office 2003.

4.  Press Tab, and read the readme, and make sure that all the directions
are followed for Outlook, such as the Preview Payne. 

5.  Press tab once more to the Install button, and install them.  You may
not have the right set files loaded for Office 2003.

6.  Finally, if Outlook was open when you did this, close it and reopen it.
You should be up and kicking.

All the best
--
Computer Room Services:  
the long cane for blind computer users.
Telephone Low-call:  08452 606 277
International:  +44(0)1438 742286,
Fax:  +44(0)1438 759589
mobile:  +44(0)7956 334938,
Email:  mailto:Steve@xxxxxxxxxxxxxx
Web site:  http://www.comproom.co.uk  
 

-----Original Message-----
From: access-uk@xxxxxxxxxxxxx [mailto:access-uk@xxxxxxxxxxxxx] On Behalf Of
Andrew Ireland
Sent: 29 January 2007 20:51
To: access-uk@xxxxxxxxxxxxx
Subject: [access-uk] Window-eyes and Outlook 2003.

Hi All,

I am trying a demo of window-eyes, and the only thing I can't appear to get
working is the status of messages in outlook 2003.  E.G.  New, Open, etc.  

Do I need to turn something on?

Many thanks in advance for any info

Andrew

** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq



** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq

** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq

Other related posts: