I use Power DVD, and have XP Home SP2. When I put a DVD into the drive it seems to be hit and miss whether it will play or not. What happens is that the disk is not recognised. When I press enter to play I get a prompt that there is no disk in the drive, and when I go into Windows Explorer and look at the E drive no files on the disk are shown. This does not happen with every DVD, and sometimes the same DVD will play and sometimes not. I have opened the computer and assured myself that the drive is connected ok, so it isn't that. I have also explored the drive properties and assured myself that the drive is working. Music CD's and MP3 disks always work fine. Could there be a setting in Power DVD or anywhere else which I need to change? Any ideas would be most welcome. Wendy ** To leave the list, click on the immediately-following link:- ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe] ** If this link doesn't work then send a message to: ** access-uk-request@xxxxxxxxxxxxx ** and in the Subject line type ** unsubscribe ** For other list commands such as vacation mode, click on the ** immediately-following link:- ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq] ** or send a message, to ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq