[access-uk] Re: Trying to connect my Touch via wi-fi

  • From: "Carol Pearson" <carol.pearson29@xxxxxxxxxxxxxx>
  • To: <access-uk@xxxxxxxxxxxxx>
  • Date: Sat, 26 Feb 2011 23:02:32 -0000

I would concur with Kevin's thoughts and hadn't thought though of coming right out of it so as to clear that field in this way. That's certainly a good idea if you're not used to the keyboard.


Don't give up. I would have been trying for much longer than I did (I think mine was the second attempt) if I hadn't had my keyboard, let me tell you! <Smiles>

Still I struggle when I want to select songs and use only the Touch.

--
Carol P
---- Original Message ----
From: "Kevin Lloyd" <kevin.lloyd3@xxxxxxx>
To: <access-uk@xxxxxxxxxxxxx>
Sent: Saturday, February 26, 2011 3:50 PM
Subject: [access-uk] Re: Trying to connect my Touch via
wi-fi

Andy, certainly that password field doesn't clear in the
same way an edit field would using a PC.  It took me
about a dozen atempts to get my password right.  What I
did was come out of the screen that's asking for the
password on each failed attempt and back in again then
from scratch to ensure the field was definitely clear and
I finally got it right.
Sorry, but my money would be on you not keying in quite
correctly or your router not allowing another device to
connect due to the number of existing connections rather
than any other kind of issue with settings.
Regards.

Kevin Lloyd
E-mail: kevin.lloyd3@xxxxxxx
----- Original Message -----
From: "ANDY COLLINS" <Andy@xxxxxxxxxxxxxxxxxxx>
To: <access-uk@xxxxxxxxxxxxx>
Sent: Saturday, February 26, 2011 2:29 PM
Subject: [access-uk] Re: Trying to connect my Touch via
wi-fi

Yes, the password is longer than 7 characters, about 15
or so. Does this matter for some reason? I do notice
when the touch says "unable to connect..." that if I go
back to the edit field, it says "password field 32
characters." I did wonder if this meant the edit field
hasn't cleared, and so when I have another attempt, it
is already adding to what I tried from last time,
instead of from the start, in a clear edit field?
No, the password isn't generic, it's one of my own.

I didn't quite get point number 3, I turn off the router
over night if powering off and on is what you were
eluding too.
Andy
----- Original Message -----
From: "Stuart MacMillan" <bznclty@xxxxxxxxx>
To: <access-uk@xxxxxxxxxxxxx>
Sent: Saturday, February 26, 2011 2:15 PM
Subject: [access-uk] Re: Trying to connect my Touch via
wi-fi

A couple of things;
1) Is your password longer than 7 characters ?
2) Is your network name the generic name like netgear ?
Change that 3) Have you reset the router  ? ( power on
and off to reset the dhcp device leases )

I also remember something from years ago that you had
to add an extra character to encrypted passwords on
some networks to log in but i cant quite remember it
just now. I will go look
As you say the kindle is fine with it just the touch
being picky but that seems to be a general issue with
Apples and netgears . I think they want you to but an
airport :-)
Stuart

On Sat, Feb 26, 2011 at 5:49 AM, ANDY COLLINS
<Andy@xxxxxxxxxxxxxxxxxxx> wrote:
Hi Carol - There's a more info button on the Touch,
when I'm on the screen
from my network, and double tapping on that brings up
a screen where there
are edit fields for ip address etc, but didn't see
anything that alloweds
for selecting the kind of passkey, mine is WEP, and
again, the Kindle, Mobile, and netbook all connect ok -

Andy
----- Original Message ----- From: "Carol Pearson"
<carol.pearson29@xxxxxxxxxxxxxx>
To: <access-uk@xxxxxxxxxxxxx>
Sent: Saturday, February 26, 2011 1:40 PM
Subject: [access-uk] Re: Trying to connect my Touch
via wi-fi

Ah, Andy, the other thing is that there is a choice
to be made about what
type of key you're using, WEP, SKP2 or whatever. Make
sure that's set correctly. (I'm not sure if I had to
set mine or it was chosen when the connection was
seen, but I didn't run into a problem there myself.)
--
Carol P
---- Original Message ----
From: "Ibrahim Gucukoglu" <ibrahim_gucukoglu@xxxxxxxx>
To: <access-uk@xxxxxxxxxxxxx>
Sent: Saturday, February 26, 2011 1:12 PM
Subject: [access-uk] Re: Trying to connect my Touch
via wi-fi

Hi Andy.

The password you will need to connect your ITouch to
your wireless network is exactly the same as for
your PC and Kindle. You need to make sure that it is
entered exactly as it has been set, IE with
capitals, punctuation marks and so on if you use
those as part of your key. Also, depending on your
router, you may have a limit on the number of
devices you can connect at any one time, since some
basic routing equipment, typically the junk boxes
some ISP's provide their customers with will only
allow a very few connections. You may wish to ask
your ISP about this if your still not having any
luck, but if the equipment is your own bought
separately then the problem will be elsewhere. All the best, Ibrahim.
----- Original Message -----
From: "ANDY COLLINS" <Andy@xxxxxxxxxxxxxxxxxxx>
To: <access-uk@xxxxxxxxxxxxx>
Sent: Saturday, February 26, 2011 12:58 PM
Subject: [access-uk] Re: Trying to connect my Touch
via wi-fi

Marie - please don't feel asking the obvious is
patronising, it isn't too me anyway, sometimes I
missed the obvious, and other times I just don't
have the knowledge.
This was actually helpful, but hasn't solved my
issue yet.
You might be getting me there however, you see, I
thought the key or password I needed would be the
same one I use to connect my mobile or Kindle to my
network [Guess I still don't know the difference
between WLAN and WI-FI!]
It seems from what you say, I actually need some
code that is written on the router? I've got a note
of the 'password' for the router, which is
different to the pass key I use to connect my
mobile and Kindle to my network
Since your message, I tried with this router
password, but still couldn't get connected.
Incidentally, this password for the router is one I
created when I set up my home network a few years
ago, so I must have changed whatever the default
one was at the time. Does this make sense? -

Andy




----- Original Message -----
From: "Marie Baisez" <baisez.marie@xxxxxxx>
To: <access-uk@xxxxxxxxxxxxx>
Sent: Saturday, February 26, 2011 11:12 AM
Subject: [access-uk] Re: Trying to connect my Touch
via wi-fi

Not sure how to say this and not sound patronising
so, here it is: The code you must insert is not your
personal password, it is your WIFI key the code
tied to your router, written on it somewhere, usually in very small
print. Sorry if I state the obvious, but, to me at least,
a password and a WIFI key code are 2 different
things: the password allows you to change the settings on
your router, the key code allows other devices to talk
to it and hear it.

Good luck!
Marie
----- Original Message -----
From: "ANDY COLLINS" <Andy@xxxxxxxxxxxxxxxxxxx>
To: <access-uk@xxxxxxxxxxxxx>
Sent: Saturday, February 26, 2011 11:23 AM
Subject: [access-uk] Re: Trying to connect my
Touch via wi-fi


Hi Damon and Marie - Yes, airplane mode is off.
The Touch can see my WLAN, the name shows up on
the screen, and I double tap to select it, and
that brings up the screen with an edit field on
to enter my password, and this is where I hit a
wall, as when I type it in, and have had sighted
help to do this too, it says "connecting to..."
then comes back and says "unable to connect to..."
I'm able to connect a Kindle to my home network
ok, using the same password, but not this Touch.
Any further thoughts? -
Andy
----- Original Message -----
From: "Damon Rose" <damon.rose@xxxxxxxxx>
To: <access-uk@xxxxxxxxxxxxx>
Sent: Friday, February 25, 2011 10:39 PM
Subject: [access-uk] Re: Trying to connect my
Touch via wi-fi

I just use my wep number from the bottom of the
modem. Didn't have to do anything else.

I assume that in the wireless part of settings,
you have wireless turned
to on?




-----Original Message-----
From: access-uk@xxxxxxxxxxxxx
[mailto:access-uk@xxxxxxxxxxxxx] On Behalf
Of ANDY COLLINS
Sent: 25 February 2011 20:27
To: access-uk@xxxxxxxxxxxxx
Subject: [access-uk] Trying to connect my Touch
via wi-fi
Hi all -

Bit stuck, I find my wi-fi name under settings,
and try to enter my password, but I get an unable to
connect message. Is there something else I need
to do, I ask because I Have seen screens asking for
IP address, and Router number, and DSN etc, do I
need these fields just to connect to my wi-fi, or
just my password? -
Andy

http://www.bbc.co.uk/
This e-mail (and any attachments) is
confidential and may contain personal views which are not the
views of the BBC unless specifically stated.
If you have received it in error, please delete
it from your system. Do not use, copy or disclose
the information in any way nor act in reliance on it
and notify the sender immediately. Please note that
the BBC monitors e-mails sent or
received. Further communication will signify
your consent to this.
** To leave the list, click on the
immediately-following link:- **
[mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message
to: ** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode,
click on the ** immediately-following link:-
**
[mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the
Subject:- faq

** To leave the list, click on the
immediately-following link:- **
[mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message
to: ** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode,
click on the ** immediately-following link:-
**
[mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the
Subject:- faq


__________ Information from ESET NOD32 Antivirus,
version of virus signature database 5908
(20110225) __________
The message was checked by ESET NOD32 Antivirus.

http://www.eset.com





__________ Information from ESET NOD32 Antivirus,
version of virus signature database 5908 (20110225)
__________
The message was checked by ESET NOD32 Antivirus.

http://www.eset.com




** To leave the list, click on the
immediately-following link:- **
[mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message
to: ** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode,
click on the ** immediately-following link:-
**
[mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the
Subject:- faq

** To leave the list, click on the
immediately-following link:- **
[mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode,
click on the ** immediately-following link:-
**
[mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the
Subject:- faq


** To leave the list, click on the
immediately-following link:- **
[mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode,
click on the ** immediately-following link:-
**
[mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq] ** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the
Subject:- faq

** To leave the list, click on the
immediately-following link:- **
[mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode,
click on the ** immediately-following link:-
**
[mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq] ** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:-
faq

** To leave the list, click on the
immediately-following link:- **
[mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode,
click on the ** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:-
faq

** To leave the list, click on the
immediately-following link:- **
[mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click
on the ** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:-
faq

** To leave the list, click on the immediately-following
link:- **
[mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click
on the ** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq


** To leave the list, click on the immediately-following
link:- **
[mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click
on the ** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq

** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq

Other related posts: