[access-uk] Re: [Talks] N91 8GB Updated firmware and now it no longer TALKS

Jackie,

No I'm currently unable to install TALKS using the Nokia PC Suite, see
below.

Dave

Dave, you've updated the firmware, and re-installed TALKS right?  If
you've done that and it isn't talking, I've no idea.  Somebody help this
man please? (smile.)

Jackie

> Hi Jackie,
>
> No I bought the phone, and it has a Virgin pay as you go SIM in it.
>
> Cheers
>
> Dave
>
> Dave, is it a locked phone, because it occurs to me that if you've 
> updated the firmware, it might not be happy if the network doesn't 
> support it.
>
> Jackie
>
>> Hi All,
>>
>> I am cross Posting this as not having much luck and unable to use 
>> phone apart from incoming calls at moment.
>> If anyone can help, please do
>>
>> Cheers
>>
>> Dave
>>
>> Chris,
>>
>> Thanks for that, however I have another problem at the moment.  The 
>> Nokia PC Suite, fails to fully interact with my N91 8GB.  I am using 
>> PC Suite version 6.85.14.1 and the application installer fails to 
>> work
>
>> with my phone.  At the top of the application installer, it says 
>> connected to N91, but on the phone selector side, in the drop down, 
>> it
>
>> says no compatible phone selected, and no other choice.  That's when 
>> it works, as most of the time when I click on the application, a 
>> dialog box appears, announcing that the application has experienced a

>> problem and needs to close.
>>
>> It's very disappointing that the PC suite does not have a check for 
>> latest update option in its help menu, however I believe I have the 
>> latest version, unless someone can point me in the direction of a 
>> later version.  The one I am using is, 6.85.14.1
>>
>> Anyone else having same problem with PC Suite? Any help much 
>> appreciated.
>>
>> Dave
>>
>> Hi, go to the Blind Sea website, click mobile corner, then click 
>> Third
>
>> Edition Third Party Software. www.blindsea.com. Hope that helps.
>>
>> Ankers, Dave (UK) wrote:
>>> Hi All,
>>>
>>> Could someone please supply a link to the latest version of TALKS 
>>> please.
>>>
>>> Dave
>>>
>>> Hi,
>>>
>>> Thanks, I've just tried finding the webpage I have on my home pc, 
>>> for
>
>>> the latest version of TALKS, and have been unsuccessful.  Could 
>>> someone please forward the address please.
>>>
>>> One problem I experience quite often is Nokia PC Suite suffering 
>>> from
>
>>> errors and having to close down,  I use FS Magic, and wonder if this

>>> is causing the problem, does anyone else use FS Magic, and have the 
>>> same problem.
>>>
>>> Dave
>>>
>>> just install it tot he phone via the PC suite, and then you go to 
>>> restore license in the register menu of talks, when it is speaking 
>>> as
>
>>> you are still using the same phone
>>>
>>> On 25 Mar 2008, at 08:57, Ankers, Dave (UK) wrote:
>>>
>>>> Hi all,
>>>>
>>>> I have used the accessible nokia updater and updated the firmware 
>>>> on
>
>>>> my
>>>> N91 8GB, from 3.00.060, to 3.10.023.  I had previously backed up my

>>>> phone, and on restarting, the phone failed to speak.  My wife 
>>>> checked
>>
>>>> the phone, and all my settings and contacts had disappeared.  I 
>>>> then
>
>>>> restored them back to the phone, but it still didn't speak.
>>>>
>>>> I presume TALKS has been scrubbed from the memory too.  I have 
>>>> downloaded to my PC, TALKS 3.5, from Steve Nuts, website, and 
>>>> before
>
>>>> I
>>>
>>>> try installing it, would appreciate any advice on how to go about 
>>>> this
>>>
>>>> and how to fully activate TALKS, as I presume it will start in 
>>>> either
>>
>>>> ten minute mode or a thirty day trial period.
>>>>
>>>> All advice, much appreciated.
>>>>
>>>> Dave
>>>>
>>>> *******************************************************************
>>>> * This email and any attachments are confidential to the intended 
>>>> recipient and may also be privileged. If you are not the intended 
>>>> recipient please delete it from your system and notify the sender.
>>>> You should not copy it or use it for any purpose nor disclose or 
>>>> distribute its contents to any other person.
>>>> *******************************************************************
>>>> *
>>>>
>>>> _______________________________________________
>>>> Talks mailing list
>>>> Talks@xxxxxxxxxxxxxx
>>>> http://lists.talksusers.com/mailman/listinfo/talks
>>>
>>> _______________________________________________
>>> Talks mailing list
>>> Talks@xxxxxxxxxxxxxx
>>> http://lists.talksusers.com/mailman/listinfo/talks
>>>
>>> _______________________________________________
>>> Talks mailing list
>>> Talks@xxxxxxxxxxxxxx
>>> http://lists.talksusers.com/mailman/listinfo/talks
>>>
>>> _______________________________________________
>>> Talks mailing list
>>> Talks@xxxxxxxxxxxxxx
>>> http://lists.talksusers.com/mailman/listinfo/talks
>>>
>> _______________________________________________
>> Talks mailing list
>> Talks@xxxxxxxxxxxxxx
>> http://lists.talksusers.com/mailman/listinfo/talks
>>
>> ** To leave the list, click on the immediately-following link:-
>> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
>> ** If this link doesn't work then send a message to:
>> ** access-uk-request@xxxxxxxxxxxxx
>> ** and in the Subject line type
>> ** unsubscribe
>> ** For other list commands such as vacation mode, click on the
>> ** immediately-following link:-
>> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
>> ** or send a message, to
>> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
>>
>
> ** To leave the list, click on the immediately-following link:-
> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
> ** If this link doesn't work then send a message to:
> ** access-uk-request@xxxxxxxxxxxxx
> ** and in the Subject line type
> ** unsubscribe
> ** For other list commands such as vacation mode, click on the
> ** immediately-following link:-
> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
> ** or send a message, to
> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
>
>
> ** To leave the list, click on the immediately-following link:-
> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
> ** If this link doesn't work then send a message to:
> ** access-uk-request@xxxxxxxxxxxxx
> ** and in the Subject line type
> ** unsubscribe
> ** For other list commands such as vacation mode, click on the
> ** immediately-following link:-
> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
> ** or send a message, to
> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
> 

** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq


** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq

Other related posts: