[access-uk] Re: TVOnics and Digital Switch-Over

  • From: Carol Pearson <carol.pearson29@xxxxxxxxxxxxxx>
  • To: "access-uk@xxxxxxxxxxxxx" <access-uk@xxxxxxxxxxxxx>
  • Date: Thu, 20 Sep 2012 17:26:23 +0100

I missed those instructions for manual tune and would like to do this. We are 
not convinced that we have the best chilling at present. Does this affect Audio 
description at all?



Carol P
Sent from my iPhone

On 20 Sep 2012, at 17:05, dudleym@xxxxxxxxxxxx wrote:

> The problem could be the same as I had, that is the signal strength is too 
> low as the box has not picked up the strongest one by using auto-tune. Follow 
> the instructions John posted for manual tune, but the numbers can go above 
> what he quoted to you. I have mine tuned to 47 but this depends on your area. 
> This has been a known problem for a couple of years and is documented on the 
> TVonics area on the digital spy forum pages. Try manual tuning from 21 
> upwards to  get the strongest signal strength you can get, mine is now on 
> 90-95% where it was only 40-45% with auto tuning.
> 
> Martin
> 
> 
> Pele West recently said:-
> 
>> Hi Steve
>> 
>> Thanks for writing.
>> 
>> The TVOnics and the television are connected via a SCART lead, which appears 
>> to be ok.
>> 
>> The aerial is connected via a booster. This is plugged into an aerial point 
>> on the wall. From the booster a cable goes into the TVOnics and another 
>> cable goes
>> out to the television. I don't think this is faulty otherwise the television 
>> would not get a proper signal, and it seems to be ok.
>> 
>> Pele
>> 
>> 
>> 
>> 
>> 
>> ** To leave the list, click on the immediately-following link:-
>> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
>> ** If this link doesn't work then send a message to:
>> ** access-uk-request@xxxxxxxxxxxxx
>> ** and in the Subject line type
>> ** unsubscribe
>> ** For other list commands such as vacation mode, click on the
>> ** immediately-following link:-
>> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
>> ** or send a message, to
>> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
> 
> ** To leave the list, click on the immediately-following link:-
> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
> ** If this link doesn't work then send a message to:
> ** access-uk-request@xxxxxxxxxxxxx
> ** and in the Subject line type
> ** unsubscribe
> ** For other list commands such as vacation mode, click on the
> ** immediately-following link:-
> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
> ** or send a message, to
> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
> 
** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq

Other related posts: