[access-uk] Re: Sygate Personal Firewall Crashing

Hi,

I know I'm a bit late on this but, after finding out about cemantec aquiring sygate, I have decided to move away from it. I decided to download new kerio 4.2 and personally I have no problems at all using it with jaws. It is important that during the instalation you chose "advanced/learning mode" rather than "simple/no popups" mode, because I guess if you chose the latter one KPF won't warn you when certain aps try to access the network, but rather just block it.
Vanja
MSN messenger: sudar23@xxxxxxxxxxx
AIM: vanja121
Skype: vanja121
http://www.sudar.co.uk
----- Original Message ----- From: "Douglas Harrison" <harrisondf@xxxxxxxxxxxxxx>
To: <access-uk@xxxxxxxxxxxxx>
Sent: Friday, December 09, 2005 8:57 AM
Subject: [access-uk] Re: Sygate Personal Firewall Crashing


Peter,
The version on the JFWlite site is only 2.14. Are you still using this? The latest seems
to be something like 4.22.
I used KPF 2.14 satisfactorily until 2 - 3 years ago but found version 3 very inaccessible
and switched to Sygate. Are the later versions such as 4.22 more screen reader
friendly? If so, I will give it a try again as I am looking for a replacement for Sygate.


Douglas



On 8 Dec 2005 at 21:21, Peter Beasley wrote:

I use Kerio personal firewall which you can download from the jfwlite
site.
----- Original Message ----- 


--

Douglas Harrison

** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq




** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq

Other related posts: