O, thanks Carol, please take it easy and rest, hope your feeling better in the morning, Warm regards, Christine. ----- Original Message ----- From: "Carol Pearson" <carol.pearson@xxxxxxxxxxxx> To: <access-uk@xxxxxxxxxxxxx> Sent: Thursday, June 14, 2007 5:38 PM Subject: [access-uk] Re: Switching on the Zen Stone > You need to do this from the Creative's menu. (It's the third of three > options). > > I had already added Brian's scripts before I did this so don't know for > certain how well it works without them. I guess though that it's reasonably > standard and maybe there wasn't any scripting done for this part of the > programme. > > To check battery status and free space, press F11 in Creative Media Lite. > Again you will need Brian's scripts to get this information via JAWS. > > HTH: > > Sorry if I don't reply further tonight but have had surgery today and pain > is becoming pretty bad so I'm going to have to give the computer a wide > birth this evening! <Smiles> > > -- > Carol > carol.pearson@xxxxxxxxxxxx > > > ----- Original Message ----- > From: "Christine Weetman" <goatmum@xxxxxxx> > To: <access-uk@xxxxxxxxxxxxx> > Sent: Thursday, June 14, 2007 4:16 PM > Subject: [access-uk] Re: Switching on the Zen Stone > > > > How do I check battery status and register the Stone Carol? Thanks, > > Christine W. > > ----- Original Message ----- > > From: "Carol Pearson" <carol.pearson@xxxxxxxxxxxx> > > To: <access-uk@xxxxxxxxxxxxx> > > Sent: Thursday, June 14, 2007 2:34 PM > > Subject: [access-uk] Re: Switching on the Zen Stone > > > > > >> Adrian, > >> > >> Battery meter is about all I've used it for and also to register the Zen > >> Stone, which apparently entitles us to upgrades. > >> > >> -- > >> Carol > >> carol.pearson@xxxxxxxxxxxx > >> > >> > >> ----- Original Message ----- > >> From: "Adrian Higginbotham" <adrian.higginbotham@xxxxxxxxxxxx> > >> To: <access-uk@xxxxxxxxxxxxx> > >> Sent: Thursday, June 14, 2007 11:44 AM > >> Subject: [access-uk] Re: Switching on the Zen Stone > >> > >> > >> > Carol - as a matter of interest what have you needed to use the > >> > creative > >> > software for? So far I haven't bothered to install it as get along just > >> > fine with windows explorer and audible manager to load the stone. > >> > > >> > Battery meter? > >> > Any other advantages? > >> > > >> > Adrian Higginbotham > >> > > >> > > >> > Accessibility content manager > >> > > >> > British Educational Communications and Technology Agency - BECTA > >> > Tel: Direct dial 024 7679 7333 - Becta switchboard 02476-416994. > >> > > >> > Email: Adrian.Higginbotham@xxxxxxxxxxxx > >> > Web: http://www.becta.org.uk/ > >> > BECTA, Millburn Hill Road, Science Park, Coventry, CV4 7JJ > >> > > >> > > >> > -----Original Message----- > >> > From: access-uk@xxxxxxxxxxxxx [mailto:access-uk@xxxxxxxxxxxxx] On > >> > Behalf > >> > Of Carol Pearson > >> > Sent: 13 June 2007 21:08 > >> > To: access-uk@xxxxxxxxxxxxx > >> > Subject: [access-uk] Re: Switching on the Zen Stone > >> > > >> > Amanda, > >> > > >> > I have found this isn't an issue if you're using Windows Explorer but, > >> > when using the Creative software, it's been a bit picky. I've found I > >> > need to open Creative, then plug in the Zen Stone. > >> > > >> > If you're just using Windows Explorer, you should probably get a > >> > dialogue up, after plugging in the Zen Stone, to indicate a drive and > >> > ask whether you want to play files etc. . . .. > >> > > >> > Hope this helps a bit. > >> > > >> > -- > >> > Carol > >> > carol.pearson@xxxxxxxxxxxx > >> > > >> > > >> > ----- Original Message ----- > >> > From: "Amanda Burt" <amanda.burt1@xxxxxxxxxxxxxx> > >> > To: <access-uk@xxxxxxxxxxxxx> > >> > Sent: Wednesday, June 13, 2007 8:33 PM > >> > Subject: [access-uk] Re: Switching on the Zen Stone > >> > > >> > > >> >>I also have a problem with my Zenstone. When i conect it up to the > >> >>computer and try to transfer files, it tells me that the player is not > >> >>deteceted. Does anyone know what that could be? > >> >> > >> >> Thanks Amanda. > >> >> ----- Original Message ----- > >> >> From: "Steve Nutt" <steve@xxxxxxxxxxxxxx> > >> >> To: <access-uk@xxxxxxxxxxxxx> > >> >> Sent: Wednesday, June 13, 2007 8:28 AM > >> >> Subject: [access-uk] Re: Switching on the Zen Stone > >> >> > >> >> > >> >>> Hi Mark, > >> >>> > >> >>> I just hold it in for about three seconds, much like turning on a > >> > mobile > >> >>> phone, and it seems to work for me every time. > >> >>> > >> >>> All the best > >> >>> > >> >>> Steve > >> >>> > >> >>> -----Original Message----- > >> >>> From: access-uk@xxxxxxxxxxxxx [mailto:access-uk@xxxxxxxxxxxxx] On > >> > Behalf > >> >>> Of > >> >>> Mark Threadgold > >> >>> Sent: 13 June 2007 08:20 > >> >>> To: accessuk list > >> >>> Subject: [access-uk] Switching on the Zen Stone > >> >>> > >> >>> Is there a particular way to turn on the Zen Stone please? I press > >> > and > >> >>> hold > >> >>> the centre button and fiddle about but it takes over half a minute to > >> > get > >> >>> it > >> >>> to start playing. Surely there is a simple way to do this? > >> >>> > >> >>> Mark Threadgold > >> >>> > >> >>> Of all the things I have ever lost, the one I miss most is my mind... > >> >>> > >> >>> ** To leave the list, click on the immediately-following link:- > >> >>> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe] > >> >>> ** If this link doesn't work then send a message to: > >> >>> ** access-uk-request@xxxxxxxxxxxxx > >> >>> ** and in the Subject line type > >> >>> ** unsubscribe > >> >>> ** For other list commands such as vacation mode, click on the > >> >>> ** immediately-following link:- > >> >>> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq] > >> >>> ** or send a message, to > >> >>> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq > >> >>> > >> >>> > >> >>> > >> >>> ** To leave the list, click on the immediately-following link:- > >> >>> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe] > >> >>> ** If this link doesn't work then send a message to: > >> >>> ** access-uk-request@xxxxxxxxxxxxx > >> >>> ** and in the Subject line type > >> >>> ** unsubscribe > >> >>> ** For other list commands such as vacation mode, click on the > >> >>> ** immediately-following link:- > >> >>> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq] > >> >>> ** or send a message, to > >> >>> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq > >> >>> > >> >>> > >> >> > >> >> > >> >> ** To leave the list, click on the immediately-following link:- > >> >> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe] > >> >> ** If this link doesn't work then send a message to: > >> >> ** access-uk-request@xxxxxxxxxxxxx > >> >> ** and in the Subject line type > >> >> ** unsubscribe > >> >> ** For other list commands such as vacation mode, click on the > >> >> ** immediately-following link:- > >> >> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq] > >> >> ** or send a message, to > >> >> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq > >> >> > >> > > >> > ** To leave the list, click on the immediately-following link:- > >> > ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe] > >> > ** If this link doesn't work then send a message to: > >> > ** access-uk-request@xxxxxxxxxxxxx > >> > ** and in the Subject line type > >> > ** unsubscribe > >> > ** For other list commands such as vacation mode, click on the > >> > ** immediately-following link:- > >> > ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq] > >> > ** or send a message, to > >> > ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq > >> > > >> > > >> > > >> > ** To leave the list, click on the immediately-following link:- > >> > ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe] > >> > ** If this link doesn't work then send a message to: > >> > ** access-uk-request@xxxxxxxxxxxxx > >> > ** and in the Subject line type > >> > ** unsubscribe > >> > ** For other list commands such as vacation mode, click on the > >> > ** immediately-following link:- > >> > ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq] > >> > ** or send a message, to > >> > ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq > >> > > >> > >> ** To leave the list, click on the immediately-following link:- > >> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe] > >> ** If this link doesn't work then send a message to: > >> ** access-uk-request@xxxxxxxxxxxxx > >> ** and in the Subject line type > >> ** unsubscribe > >> ** For other list commands such as vacation mode, click on the > >> ** immediately-following link:- > >> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq] > >> ** or send a message, to > >> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq > >> > >> > > > > ** To leave the list, click on the immediately-following link:- > > ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe] > > ** If this link doesn't work then send a message to: > > ** access-uk-request@xxxxxxxxxxxxx > > ** and in the Subject line type > > ** unsubscribe > > ** For other list commands such as vacation mode, click on the > > ** immediately-following link:- > > ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq] > > ** or send a message, to > > ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq > > > > ** To leave the list, click on the immediately-following link:- > ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe] > ** If this link doesn't work then send a message to: > ** access-uk-request@xxxxxxxxxxxxx > ** and in the Subject line type > ** unsubscribe > ** For other list commands such as vacation mode, click on the > ** immediately-following link:- > ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq] > ** or send a message, to > ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq > > ** To leave the list, click on the immediately-following link:- ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe] ** If this link doesn't work then send a message to: ** access-uk-request@xxxxxxxxxxxxx ** and in the Subject line type ** unsubscribe ** For other list commands such as vacation mode, click on the ** immediately-following link:- ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq] ** or send a message, to ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq