[access-uk] Re: Sound Taxi conversion speed

Hi Andy.

This sounds odd.  Have you checked that the troubleshooting slide bar in the 
options is set all the way over to 0?  Find the said control and tap left a few 
times to make sure it is, otherwise performance will be slow as troubleshooting 
mode is designed to slow down conversions for difficult files.


  ----- Original Message ----- 
  From: ANDY COLLINS 
  To: access-uk@xxxxxxxxxxxxx 
  Sent: Tuesday, January 13, 2009 4:01 PM
  Subject: [access-uk] Re: Sound Taxi conversion speed


  Hi Ibrahim -

  Not sure how to test what percentage of efficiency sound taxi is working to, 
but even if my system is below optimum efficiency, an approximate conversion 
rate of 10 percent per hour of a 7 hour audio book can't be right, this makes 
the conversion time greater than the running time! -

  Andy
    ----- Original Message ----- 
    From: Ibrahim Gucukoglu 
    To: access-uk@xxxxxxxxxxxxx 
    Sent: Tuesday, January 13, 2009 3:03 PM
    Subject: [access-uk] Re: Sound Taxi conversion speed


    Hi Andy.

    Conversion will only work at maximum performance if your system meets or 
exceeds the performance rating of sound taxi.  This is a calculation of 
available necessary resources such as CPU usage, hard disk speed etc.  A rating 
of efficiency is calculated to be a percentage, so see at what percentage of 
efficiency sound taxi is working to.

    Hope this helps.


      ----- Original Message ----- 
      From: ANDY COLLINS 
      To: Access-UK 
      Sent: Tuesday, January 13, 2009 11:44 AM
      Subject: [access-uk] Sound Taxi conversion speed


      Hi all -

      I've just bought the pro version of this programme, where it says it 
converts at 50 times the playback rate, this means to me, that a 7 hour Audible 
file should take less than 10 minutes to convert to MP3. I've got the 
conversion bitg rate set to 64 KBPS; so far, it has taken 45 minutes to convert 
4 percent of the Audible file! Obviously, this isn't what I was hoping for, 
does anybody know why this conversion is so slow? This is on my Vista laptop.

      Thanks -

      Andy

Other related posts: