Hi Donna, OK, I assume you are pairing through the normal Bluetooth pairing of iOS 6. Don’t do that. Instead do this. First go to Settings, General, Accessibility, Voiceover, Braille. You should find a button called Select Braille display. Before you hit that, turn on the Esys, and select Bluetooth from the main menu. Now don’t touch the Esys yet. Select the Select Braille device button, and your phone should start searching for a device. Hopefully it will now find the Esys. Select it if it does, then read the screen. The iPhone should tell you it is paired successfully. Finally, you may need to hit the connect button. Give me a ring tomorrow if you are still having problems. All the best Steve -- Computer Room Services 77 Exeter Close Stevenage Hertfordshire SG1 4PW Tel: +44(0)1438-742286 Mob: +44(0)7956-334938 Fax: +44(0)1438-759589 Email: <mailto:steve@xxxxxxxxxxxxxx> steve@xxxxxxxxxxxxxx Web: <http://www.comproom.co.uk> http://www.comproom.co.uk From: access-uk@xxxxxxxxxxxxx [mailto:access-uk@xxxxxxxxxxxxx] On Behalf Of Donna Slater Sent: 29 September 2012 20:42 To: access Subject: [access-uk] Sorry help please connecting iPhone to esys12 braille display Sorry for the previous blank message. Please could someone help. I am trying to connect my Esys12 to my iPhone running ios6. I went into settings and turned bluetooth on. I then turned on the Esys display and went to the bluetooth menu and enabled bluetooth. A very brief message came up on the Braille display saying connecting and then immediately disconnected, whilst on the iPhone I continually got the message searching for device, and although I waited some time, no devices seemed to be discoverable. No doubt I am doing something wrong or missing out a step, but I really can’t work out what I should be doing. So, if anyone could help me, it would be much appreciated. Many thanks in advance. Donna