[access-uk] Re: Setting up the volume.
- From: "roger south" <roger.south@xxxxxxxxxx>
- To: <access-uk@xxxxxxxxxxxxx>
- Date: Thu, 18 Feb 2010 12:36:19 -0000
Colin
This sounds like the Control Panel to me.
Roger
What disease did "cured" ham actually have?
----- Original Message -----
From: "Colin r. Howard" <colin@xxxxxxxxx>
To: <dummy@xxxxxxxxxxxxx>
Sent: Thursday, February 18, 2010 12:31 PM
Subject: [access-uk] Setting up the volume.
Greetings,
Please can somebody remind me.
I have seen posts on one or more groupps to which I am sending, to ask
about
setting up the volume for recording off the net.
I do not have a problem as I solved it a good while ago and here is my
need.
I cannot remember what I did but somewhere I read about a means of setting
the volume by going into somewhere which showed me a list of possible
volumes available on my system, against each was a check and if it was
set,
the volume would be displayed in the volume controls.
I thought I had kept the post but it seems I didn't.
Please, if you understand about what I am asking, please come back
advising
where I look for my poor likwl bwain urtz!!
From Colin Howard who lives near Southampton in
Southern England.
** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
Other related posts: