[access-uk] Re: Setting up Virgin
- From: "Barry Toner" <barry@xxxxxxxxxxxxxxxxx>
- To: <access-uk@xxxxxxxxxxxxx>
- Date: Tue, 9 Feb 2010 10:28:04 -0000
The nice thing is as soon as you run that Registration, you can safely whip
off any software it put on.
Long gone are the days where you needed to keep an ISPs software on a box to
connect to the net.
Barry
-----Original Message-----
From: access-uk@xxxxxxxxxxxxx [mailto:access-uk@xxxxxxxxxxxxx] On Behalf Of
Carol Pearson
Sent: Sunday, February 07, 2010 8:07 PM
To: access-uk@xxxxxxxxxxxxx
Subject: [access-uk] Re: Setting up Virgin
Well, Ibrahim, I obviously never had to do any of that when I signed up, but
then it was some years ago and they weren't Virgin Media at that time.
Sorry, Hannah, if I've unintentionally misled you ...
I would just suggest that you get very full instructions from them as to
what you have still to do when they leave and make sure you have all the
information to hand.
--
Carol
carol.pearson29@xxxxxxxxxxxxxx
On Twitter: http://twitter.com/songbird49a
---- Original Message ----
From: "Ibrahim Gucukoglu" <ibrahim_gucukoglu@xxxxxxxx>
To: <access-uk@xxxxxxxxxxxxx>
Sent: Sunday, February 07, 2010 2:26 PM
Subject: [access-uk] Re: Setting up Virgin
> Hi Chris.
>
> The software is part toolset and part activation. When
> you insert the cd, you'll be guided through some screens to set up your
> connection and services such as email, you'll also install diagnostic
> software
> and probably be offered free trial security software which you can
> optionally install. When the engineer leaves, the connection will be in a
> pre-activated state. Hanna will have to complete the process on her
> computer which
> needs to be connected via cable to the modem or supplied router.
>
> All the best, Ibrahim.
> ----- Original Message -----
> From: "Chris Hallsworth" <christopherh40@xxxxxxxxxxxxxx>
> To: <access-uk@xxxxxxxxxxxxx>
> Sent: Sunday, February 07, 2010 2:20 PM
> Subject: [access-uk] Re: Setting up Virgin
>
>
>> Sure, fully understood. But is the software essential or
>> will it just work natively so to speak.
>>
>> Chris Hallsworth
>> e-mail and Facebook: christopherh40@xxxxxxxxxxxxxx
>> MSN: ch9675@xxxxxxxxxxx
>> Skype: chrishallsworth7266
>>
>> On 07/02/2010 14:12, Saqib wrote:
>>> Once the equipment is installed the technition will
>>> leave Hannah the installation CD and she needs to
>>> install it. They won't install it for you as they
>>> aren't covered to deal with any existing hardwear such
>>> as a computer. This is what I was told when I had VM
>>> installed and I had to install the software supplied.
>>> --------------------------------------------------
>>> From: "Chris Hallsworth" <christopherh40@xxxxxxxxxxxxxx>
>>> Sent: Sunday, February 07, 2010 1:44 PM
>>> To: <access-uk@xxxxxxxxxxxxx>
>>> Subject: [access-uk] Setting up Virgin
>>>
>>>> Hello all,
>>>> Hannah will be using Virgin Media as her ISP for her
>>>> new flat as she has an existing NTL line. Now, will
>>>> she need to configure anything, or can she just
>>>> connect via the ethernet or wireless networks once
>>>> Virgin has installed everything? Thanks for any answers.
>>>> From Chris.
>>>> --
>>>> Chris Hallsworth
>>>> e-mail and Facebook: christopherh40@xxxxxxxxxxxxxx
>>>> MSN: ch9675@xxxxxxxxxxx
>>>> Skype: chrishallsworth7266
>>>> ** To leave the list, click on the
>>>> immediately-following link:- **
>>>> [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
>>>> ** If this link doesn't work then send a message to:
>>>> ** access-uk-request@xxxxxxxxxxxxx
>>>> ** and in the Subject line type
>>>> ** unsubscribe
>>>> ** For other list commands such as vacation mode,
>>>> click on the ** immediately-following link:-
>>>> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
>>>> ** or send a message, to
>>>> ** access-uk-request@xxxxxxxxxxxxx with the Subject:-
>>>> faq
>>>>
>>> ** To leave the list, click on the
>>> immediately-following link:- **
>>> [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
>>> ** If this link doesn't work then send a message to:
>>> ** access-uk-request@xxxxxxxxxxxxx
>>> ** and in the Subject line type
>>> ** unsubscribe
>>> ** For other list commands such as vacation mode, click
>>> on the ** immediately-following link:-
>>> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
>>> ** or send a message, to
>>> ** access-uk-request@xxxxxxxxxxxxx with the Subject:-
>>> faq
>>>
>> ** To leave the list, click on the immediately-following
>> link:- **
>> [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
>> ** If this link doesn't work then send a message to:
>> ** access-uk-request@xxxxxxxxxxxxx
>> ** and in the Subject line type
>> ** unsubscribe
>> ** For other list commands such as vacation mode, click
>> on the ** immediately-following link:-
>> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
>> ** or send a message, to
>> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
>>
>>
>>
>> __________ Information from ESET Smart Security, version
>> of virus signature database 4844 (20100207) __________
>>
>> The message was checked by ESET Smart Security.
>>
>> http://www.eset.com
>>
>>
>>
>
>
> __________ Information from ESET Smart Security, version
> of virus signature database 4844 (20100207) __________
> The message was checked by ESET Smart Security.
>
> http://www.eset.com
>
>
>
> ** To leave the list, click on the immediately-following
> link:- **
> [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
> ** If this link doesn't work then send a message to:
> ** access-uk-request@xxxxxxxxxxxxx
> ** and in the Subject line type
> ** unsubscribe
> ** For other list commands such as vacation mode, click
> on the ** immediately-following link:-
> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
> ** or send a message, to
> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
__________ Information from ESET Smart Security, version of virus signature
database 4845 (20100207) __________
The message was checked by ESET Smart Security.
http://www.eset.com
__________ Information from ESET Smart Security, version of virus signature
database 4845 (20100207) __________
The message was checked by ESET Smart Security.
http://www.eset.com
__________ Information from ESET Smart Security, version of virus signature
database 4849 (20100208) __________
The message was checked by ESET Smart Security.
http://www.eset.com
__________ Information from ESET Smart Security, version of virus signature
database 4849 (20100208) __________
The message was checked by ESET Smart Security.
http://www.eset.com
** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
Other related posts:
