[access-uk] Re: Screen resolution and colour

Do the following:
1. Open control panel.
2. Press enter on display.
3. Control-tab to the settings tab.
4. Tab to the resolution slider and move it till it says 1024 by 786 or
something like that.
5. Tab to the colours combo box and set it to 32-bit.
6. Tab to OK and press enter.
7. If you're asked if you wish to keep this setting, press enter on yes.
Hope that helps.
On Sat, 20 Jan 2007 12:06:30 -0000, "Andy Collins"
<andy@xxxxxxxxxxxxxxxxxxx> said:
> Hi Andy - when I change to 600x800 last night, it messed up my JAWS
> setting
> for XP! as it modified the desk top. I was looking under display in
> control
> panel, and saw on the appropriate tab a list of resolutions; originally,
> mine was set to 1024x768 with a percentage of %9 [not sure what the
> percentage thing is about], when I selected 600x800, the percentage went
> down to 0, and JAWS kept seeing blanks everywhere, no matter what window
> I
> was in; it would read emails or documents in say all mode, but not line
> by
> line. From what you say, and waht I seem to remember, 600x800 is the
> correct
> setting, but Christopher talked about colours, and this is where I'm
> stuck,
> so if you or anybody can help me get these setting right for JAWS, then
> I'd
> apreciate it.
> 
> Thanks - Andy
> ----- Original Message -----
> From: "Andy Logue" <andy@xxxxxxxxxxxxxxxxxxxxxxxxx>
> To: <access-uk@xxxxxxxxxxxxx>
> Sent: Saturday, January 20, 2007 11:54 AM
> Subject: [access-uk] Re: Screen resolution and colour
> 
> 
> Hi Andy.
> 
> My settings are 600 by 800.
> 
> Are you able to navigate your way back to change it or would youlike me
> to
> walk you through it.
> 
> Best wishes.
> Andy
> 
> 
> 
> ----- Original Message -----
> From: "Andy Collins" <andy@xxxxxxxxxxxxxxxxxxx>
> To: <access-uk@xxxxxxxxxxxxx>
> Sent: Saturday, January 20, 2007 10:33 AM
> Subject: [access-uk] Screen resolution and colour
> 
> 
> > My screen resolution and colour is set to: 1152x864, colour: 32 bpp; I
> > don't
> > think this is right for JAWS, I seem to think it should be 600x800, is
> > that
> > right, and what should colour be set to?
> >
> > Thanks - Andy
> >
> > ** To leave the list, click on the immediately-following link:-
> > ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
> > ** If this link doesn't work then send a message to:
> > ** access-uk-request@xxxxxxxxxxxxx
> > ** and in the Subject line type
> > ** unsubscribe
> > ** For other list commands such as vacation mode, click on the
> > ** immediately-following link:-
> > ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
> > ** or send a message, to
> > ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
> >
> >
> 
> 
> ** To leave the list, click on the immediately-following link:-
> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
> ** If this link doesn't work then send a message to:
> ** access-uk-request@xxxxxxxxxxxxx
> ** and in the Subject line type
> ** unsubscribe
> ** For other list commands such as vacation mode, click on the
> ** immediately-following link:-
> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
> ** or send a message, to
> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
> 
> 
> --
> This email has been verified as Virus free
> Virus Protection and more available at http://www.plus.net
> 
> ** To leave the list, click on the immediately-following link:-
> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
> ** If this link doesn't work then send a message to:
> ** access-uk-request@xxxxxxxxxxxxx
> ** and in the Subject line type
> ** unsubscribe
> ** For other list commands such as vacation mode, click on the
> ** immediately-following link:-
> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
> ** or send a message, to
> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
> 
Christopher Hallsworth
Skype name chrishallsworth7266

** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq

Other related posts: