[access-uk] Re: SAFELY REMOVING HARDWARE

Thanks, George, that's the kind of reply (confirmation) I needed.

--
Carol
carol.pearson29@xxxxxxxxxxxxxx
On Twitter:  http://twitter.com/songbird49a

---- Original Message ----
From: "George Bell" <george@xxxxxxxxxxxxxxxxxxx>
To: <access-uk@xxxxxxxxxxxxx>
Sent: Wednesday, February 24, 2010 11:29 AM
Subject: [access-uk] Re: SAFELY REMOVING HARDWARE

Hi Carol,

"Eject" is usually used to eject a CD, but these days it
seems to have crept into other areas.

Personally, I always use "Safely Remove Hardware" which
seems to do extra checks such as ensuring you don't have
a Windows Explorer window open looking at the device.

George

-----Original Message-----
From: access-uk@xxxxxxxxxxxxx
[mailto:access-uk@xxxxxxxxxxxxx] On Behalf Of Carol
Pearson Sent: 24 February 2010 11:20
To: Access UK Mailing List
Subject: [access-uk] SAFELY REMOVING HARDWARE

Hi all,

I've always been a bit puzzled as to when I use "Savely
Remove Hardware" or
"Eject" before removing cards from the computer.  Can
someone please tell me
which should be used when?

Thanks.

--
Carol
carol.pearson29@xxxxxxxxxxxxxx
On Twitter:  http://twitter.com/songbird49a


** To leave the list, click on the immediately-following
link:- **
[mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click
on the ** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq

** To leave the list, click on the immediately-following
link:- **
[mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click
on the ** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq

Other related posts: