[access-uk] Re: Reading txt messages with talks?

Hi Andy,

To add to what you say, the quickie shortcut toggle for cursor modes is
Talks long 2.  That is to say press the Talks key, then hold down 2 for
about a second.  The way to remember this is that the letter C for Cursors
is on the number 2.

Hope this helps.

All the best
--
Computer Room Services:  the long cane for blind computer users.
Telephone Voice:  +44(0)1438 742286, Fax/BBS:  +44(0)1438 759589
mobile:  +44(0)7956 334938, 
Email:  Steve@xxxxxxxxxxxxxx 
Web site:  http://www.comproom.co.uk  

-----Original Message-----
From: access-uk@xxxxxxxxxxxxx [mailto:access-uk@xxxxxxxxxxxxx] On Behalf Of
Andy Collins
Sent: 17 June 2005 16:22
To: access-uk@xxxxxxxxxxxxx
Subject: [access-uk] Re: Reading txt messages with talks?

Hi - If you look under TALKS settings\advanced settings, you should see a
setting called Cursor mode, and there are choices in there for letters etc.

HTH

Andy
----- Original Message -----
From: "Ali" <alpot@xxxxxxxxxxxxxxxx>
To: <access-uk@xxxxxxxxxxxxx>
Sent: Friday, June 17, 2005 4:01 PM
Subject: [access-uk] Reading txt messages with talks?


> Hi,
> I have just installed talks 2.18 and found out that I cannot read incoming
> text messages letter by letter or word by word.   Does anyone have any 
> idea
> what this could be?  I am using 6600.
>
> Thank you.
>
> --------------------
>
> Ali
>
> ** To leave the list, click on the immediately-following link:-
> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
> ** If this link doesn't work then send a message to:
> ** access-uk-request@xxxxxxxxxxxxx
> ** and in the Subject line type
> ** unsubscribe
> ** For other list commands such as vacation mode, click on the
> ** immediately-following link:-
> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
> ** or send a message, to
> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
>
> --
> This email has been verified as Virus free
> Virus Protection and more available at http://www.plus.net 

** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq



** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq

Other related posts: