I have had similar issues with mine as well. I do one of two things. If you hold the on/off button down for about 10 seconds or so, this resets it. But, it goes back to where you were the last time it was powered off and then turned back on. So, if you had the stream turned on all day, and listening to it for a long time, then you completely lose your place, But you can also put sleep on for fifteen minutes and let it go off and then your place isn't lost. that's the only thing I can think of.
SheaFind me on Facebook and on Skype Shea.Anker. Feel free to contact me on Messenger, sheabat70@xxxxxxxxxxx ----- Original Message ----- From: "Adrien Collins" <adriencollins22160@xxxxxxxxxxxxxx>
To: "'access uk'" <access-uk@xxxxxxxxxxxxx> Sent: Thursday, December 09, 2010 6:52 AM Subject: [access-uk] Problems with my victor streams
Hi I know this is a message best sent to the vr stream lists but I thought some one on here may have some ideas. For about the last six months, my victor stream has been locking up when I use earphones. I can tern it on without earphones and when I plug them in it locks up after about twenty minutes or so. When I use ordinary speakers such as those for my pc, this doesn't happen. I sent my stream back to humanware to be repaired and serviced in September and they couldn't find anything physically wrong with it. They replaced the earphone jack and other warn parts. I up-graded the software on both my victor streams just recently and I notice that both my streams have the same problem now. Humanware first thought it was a hardware issue but if that was the case it would only happen on one stream, not two, has anyone any ideas what this may be? I suspect it is something in the software but I'm not an expert. I'm experimenting and have just downloaded a different version of the same software, see what happens and I have swapped earphones on the two streams. I am really puzzled. Regards Adrien ** To leave the list, click on the immediately-following link:- ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe] ** If this link doesn't work then send a message to: ** access-uk-request@xxxxxxxxxxxxx ** and in the Subject line type ** unsubscribe ** For other list commands such as vacation mode, click on the ** immediately-following link:- ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq] ** or send a message, to ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
** To leave the list, click on the immediately-following link:- ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe] ** If this link doesn't work then send a message to: ** access-uk-request@xxxxxxxxxxxxx ** and in the Subject line type ** unsubscribe ** For other list commands such as vacation mode, click on the ** immediately-following link:- ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq] ** or send a message, to ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
