[access-uk] Re: Please can anyone help

Hi Peter

Had a similar problem last year. It was finally solved when a tech support 
guy suggested cleaning the fans. They were a little clogged so a good 
blasting with a compressed air canister from Maplin's solved the problem for 
me. Hope it's as simple for you.

Roger

Some mistakes are too much fun to only make once.


----- Original Message ----- 
From: "Peter BEasley" <p.beasley@xxxxxxxxxxxxx>
To: <access-uk@xxxxxxxxxxxxx>
Sent: Thursday, April 12, 2007 4:05 PM
Subject: [access-uk] Please can anyone help


>I have had an ongoing problem with my PC since early March.  The problem is 
>that after the machine has been running for half an hour to 40 minutes, it 
>simply runs out of steam and stops working.  The sort of error mesage I 
>sometimes get tells me that there is no buffer available or unable to 
>allocate memory.  A computer engineer who tested this machine in his 
>workshop saidthat he was unable to replicate the problem but I don't see 
>how this can be as I have left the machine onwith no applications running 
>for 3 quarters of an hour and was unable to start the screenreader.  The 
>engineer did send me the following from the Microsoft support website but 
>as this involves adding something to the registry, I wouldlike further 
>advice.
> 1.    Start Registry Editor.
> 2.    Locate the following subkey in the registry, and then click
> Parameters:
> HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters
> 3.    On the Edit menu, click New, and then add the following registry
> entry:
> Value Type: DWORD
> Value Name: MaxUserPort
> Value data: 65534
> Valid Range: 5000-65534 (decimal)
> Default: 0x1388 (5000 decimal)
> Description: This parameter controls the maximum port number that is used
> when a program requests any available user port from the system. Typically 
> ,
> ephemeral (short-lived) ports are allocated between the values of 1024 and
> 5000 inclusive.
> 4.    Quit Registry Editor.
> ** To leave the list, click on the immediately-following link:-
> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
> ** If this link doesn't work then send a message to:
> ** access-uk-request@xxxxxxxxxxxxx
> ** and in the Subject line type
> ** unsubscribe
> ** For other list commands such as vacation mode, click on the
> ** immediately-following link:-
> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
> ** or send a message, to
> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
>
> 

** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq

Other related posts: