[access-uk] Re: PANASONIC CORDLESS PHONE
- From: "Carol Pearson" <carol.pearson29@xxxxxxxxxxxxxx>
- To: <access-uk@xxxxxxxxxxxxx>
- Date: Wed, 16 Dec 2009 12:26:03 -0000
All units are on and warm ...
The handsets still beep and show good battery power.
They are just not communicating and won't, even if I follow instructions to
try to get them to do so.
Think the base has died!
--
Carol
carol.pearson29@xxxxxxxxxxxxxx
On Twitter: http://twitter.com/songbird49a
---- Original Message ----
From: "Mervyn Robertson"
<Mervyn.Robertson@xxxxxxxxxxxxxxxxxxx> To:
<access-uk@xxxxxxxxxxxxx> Sent: Wednesday, December 16,
2009 9:40 AM Subject: [access-uk] Re: PANASONIC CORDLESS
PHONE
I'm assuming that the cordless phones normally sit in a
cradle? Are the power units to all of the phones switched
on? On several occasions, I have cussed loudly when my
wife has pulled out a plug to use another device and not
replaced the phone power, only to find that nobody has
been able to call us for days!
Regards
Mervyn
-----Original Message-----
From: access-uk@xxxxxxxxxxxxx
[mailto:access-uk@xxxxxxxxxxxxx] On Behalf Of Carol
Pearson
Sent: 15 December 2009 23:21
To: Access UK Mailing List
Subject: [access-uk] PANASONIC CORDLESS PHONE
Hi all,
Some will remember, perhaps, that I was one of those who
purchased a Panasonic cordless phone about three years
ago and highly recommended it.
Indeed, we've been extremely pleased with it until today
...
Now it seems to have gone up the shoot!
Although I know that both the handsets and the base are
working independently, the base unit no longer seems to
be able to find its handsets, even though I've tried to
register them again.
I am suspecting that maybe there's an internal battery
inside the main unit
which could have gone, or perhaps the unit has gone now
for good.
Has anyone else experienced a similar problem, or has an
idea what may be
causing this one?
Do we need to go out and buy a new one or is there still
hope for this one!
--
Carol
carol.pearson29@xxxxxxxxxxxxxx
On Twitter: http://twitter.com/songbird49a
** To leave the list, click on the immediately-following
link:-
**
[mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click
on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
______________________________________________________________________
This email has been scanned by the MessageLabs Email
Security System. For more information please visit
http://www.messagelabs.com/email
______________________________________________________________________
** To leave the list, click on the immediately-following
link:-
**
[mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click
on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
Other related posts:
